T-Stat Interface [Pac-Us444Cn-1] - Mitsubishi Electric M Series Manual
Hide thumbs
Also See for M Series:
- Manual (586 pages) ,
- Installation manual (120 pages) ,
- Service manual (46 pages)
Table of Contents
1. CONTROLS
1-6. T-STAT Interface [PAC-US444CN-1]
Photo
Specifications
Model name
Length
Size
Diameter
Cable core
Material
Insutation
Sheath
Weight
Standards
Standards
Name
How to Use / How to Install
1. Card key/Window connection with the open/close switch
1. How to connect the open/close switch
• Connect the connector to CN104 on the indoor electronic control P.C. board.
• Connect the electrical wires with the tag of "IN" to the switch.
• Separately insulate the wires with the tag of "OUT".
Indoor electronic control
P.C. board
2. Operation details
• Opening the switch stops operation of the air conditioner.
A remote controller is enabled even the switch is open. To disable the remote controller, cut JR88 on the indoor
electronic control P.C. board.
• When the switch closes, the ON/OFF operation from the remote controller is enabled.
Due to continuing improvement, above specification may be subject to change without notice.
© 2016 Mitsubishi Electric US, Inc.
MAC-1702RA-E
2 m
4.48 mm x 3.09 mm
Tinned annealed copper wire
Accessory
Heat-resistant PVC
Heat-resistant PVC
Part name
72 g
Mounting cord
UL2464
clamp
2464 2CFB #23
Screw for
mounting
4×16
Fastener
(for bundling the
wires)
Descriptions
This product is an adapter which inputs the incoming signals from an
open/close switch to the air conditioner and outputs the ON/OFF sig-
nals from the air conditioner to the back-up heater.
Applicable Models
MFZ-KJ09/12/15/18NA
MAC-1710RA-E
10 m
4.48 mm x 3.09 mm
Tinned annealed copper wire
Heat-resistant PVC
Heat-resistant PVC
Illustration
Q' ty
360 g
UL2464
2
2464 2CFB #23
1
1
Insulate the
wires separately.
Switch
Usable at DC 5V, 0.2mA or less
M-Series - Controls (December 2016)
Accessory
Part name
Illustration
Mounting cord
clamp
Screw for
mounting
4×16
Fastener
(for bundling the
wires)
Use one mounting cord
clamp per cable.
Mounting cord clamp
Fasten the clamps together
with a screw.
Q' ty
2
1
1
Cable
Screw
73
Hide quick links:
Table of Contents
