Configuring Recording Settings (Only Vrm And Local Storage) - Bosch LTC-1311-20 Configuration Manual
Video management system
Hide thumbs
Also See for LTC-1311-20:
- Operator's manual (88 pages) ,
- Specifications (6 pages) ,
- Reference manual (24 pages)
Table of Contents
Bosch Video Management System
To configure recording settings:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. In the
11. In the Pre-event [s] column, click a cell and type the appropriate time.
12. In the Post-event [s] column, click a cell and type the appropriate time.
NOTICE!
If pre-event time for motion recording and pre-event time for alarm recording differ, the higher
value is used for both.
If the configured pre-event time would overlap a preceding alarm or motion recording, the pre-
event recording starts after the preceding recording is finished.
For detailed information on the various fields, see the Online Help for the appropriate
application window.
9.5
Configuring recording settings (only VRM and Local Storage)
Main window >
(for example
Note: For recording, ensure that the corresponding VRM or local storage is properly
configured.
VRM: Devices > Expand
Local Storage: Devices > Expand
To configure recording settings:
1.
2.
3.
Bosch Sicherheitssysteme GmbH
In the
column of Continuous Recording, select the desired stream quality or disable
continuous recording.
In the
column, select a check box to activate audio.
In the
column of Live/Pre-event Recording, select the desired stream quality or
select stream 1.
In the
column, select a check box to activate audio.
In the
column of Motion Recording, select the desired stream quality or disable
motion recording.
In the
column, select a check box to activate audio.
In the Pre-event [s] column, click a cell and type the appropriate time.
In the Post-event [s] column, click a cell and type the appropriate time.
In the
column of Alarm Recording, select the desired stream quality or disable alarm
recording.
column, select a check box to activate audio.
Cameras and Recording > Click
)
>
In the Recording column, select On.
In the
column, click a cell and select the appropriate stream quality.
Under Continuous or Prealarm Recording, in the Mode column, select the desired
recording mode.
In the Quality column, click a cell to select the stream quality of stream 1.
If you select Prealarm as the recording mode, click a cell in the Duration [s] column to
select the alarm recording time before the alarm in seconds.
Configuration Manual
Configuring cameras and recording settings | en
> Click a Recording Schedule tab
>
Configuration Client | V3 | 2010.07
51
- Quick Links:
- Installing Hardware
Hide quick links:
Table of Contents
