Table of Contents
Quick Links
Solar Water Heater
Manual for Installation and Operation
Direct System Models
TP180REL
TP300REL
TP180REF
TP300REF
TP180RNL (*)
TP300RNL (*)
TP180RNF (*)
TP300RNF (*)
(*)without electric heater
WARNING: Use copper pipe ONLY. Plastic pipe MUST NOT be used.
It is a requirement of a solar water heater installation that all pipe work be in copper and not
plastic, due to the effects of high water temperatures.
Indirect System Models
TP180JEL
TP300JEL
TP180JEF
TP300JEF
TP180JNL (*)
TP300JNL (*)
TP180JNF(*)
TP300JNF(*)
Table of Contents
Related Manuals for Haier TP180REL
Summary of Contents for Haier TP180REL
- Page 1 Solar Water Heater Manual for Installation and Operation Direct System Models Indirect System Models TP180REL TP180JEL TP300REL TP300JEL TP180REF TP180JEF TP300REF TP300JEF TP180RNL (*) TP180JNL (*) TP300RNL (*) TP300JNL (*) TP180RNF (*) TP180JNF(*) TP300RNF (*) TP300JNF(*) (*)without electric heater WARNING: Use copper pipe ONLY. Plastic pipe MUST NOT be used.
-
Page 2: Table Of Contents
Content ......Safety Consideration (Read it before use) ..........Product Features ........Installation Introduction ........Installation Consideration ........Installation of Solar Collector ....... Installation of Water Storage Tank ........Connection of Pipeline ....Filling the Heat Exchange Jacket(For Indirect System) ...... -
Page 3: Safety Consideration (Read It Before Use)
Safety Consideration (Read it before use) Symbol Explanation Indicate the behavior to be prohibited. Prohibit ！ Attention Indicate the events to be considered. Indicate the behavior shall be implemented. Alert If this water heater is installed with electric heater, you need to read it carefully. -
Page 4: Product Features
Product Features Installation Introduction Product Features 1. Integral Installation The installation of the collectors is integrated with that of the water storage tank and they both are well incorporated with the building, which can save indoor space as far as possible. 2. -
Page 5: Installation Introduction
Installation Introduction Installation of Solar Collector The product uses high-efficient flat collectors fixed on the aluminum frame. 1.Select a suitable position for the solar collectors. 2.Determine the location of the collector rail, and hook the collector straps to the collector rail. 3.Remove the tiles from the place reserved for the collector on the roof, then fix the collector strap to the rafters, using self-drilling screws or stainless steel nails (or with embedded expansion bolts). -
Page 6: Installation Of Water Storage Tank
Installation Introduction Installation of Water Storage Tank 1.Take the water storage tank out of the packing case, unfasten the nuts and washers fixed on the bolts on the both ends of the base of the tank. 2.Determine the location of the water storage tank. 3.The installers shall follow the instructions in the following assembly sketch map to fit the tank frame and the tank strap together. -
Page 7: Connection Of Pipeline
Installation Introduction Connection of Pipeline Please refer to the following system sketch map. 1.Measure the distances from the collector circulation water inlet to the tank circulation water outlet, and from the collector circulation water outlet to the tank circulation water inlet. -
Page 8: Connection Of Valves And Pipe Fittings
Installation Introduction Note: 1.The heat transfer fluid is a food grade propylene glycol and is not toxic. However, care must be taken when handling not to spill or accidentally consume. 2.It is normal that some heat transfer fluid may flow out from the safety valve as the heat transfer fluid is expanded due to the high solar energy collected. -
Page 9: Circuit Connections
Installation Introduction Circuit Connections Circuit Connections of water storage tank Open the adapting plate on the left end of the tank, follow the instructions of the wiring terminals in the diagram below to correctly wire the cables. 1.Determine the length of the electrical cable according to the distance between the electrical source and the water tank, and this is the power supply of the electrical heater of the water tank. -
Page 10: Technical Parameters
Technical Parameters Packing List Technical Parameters TP180REL/REF TP180RNL/RNF TP300RNL/RNF TP300REL/REF System Model TP180JNL/JNF TP300JEL/JEF TP180JEL/JEF TP300JNL/JNF Volume of water tank 180L 300L 180L 300L Waterproof level of tank IPX4 IPX4 IPX4 IPX4 Rated internal pressure 0.85MPa 0.85MPa 0.85MPa 0.85MPa Dimension of water tank... -
Page 11: Exploded View
Exploded View Exploded View of One Collector TP180REL TP180RNL TP180REF TP180RNF How to fix the water tank Water tank Self tapping screw Frame... - Page 12 Exploded View Exploded View of Two Collectors TP300REL TP300RNL TP300REF TP300RNF How to fix the water tank Water tank Self tapping screw Frame...
- Page 13 Exploded View Exploded View of One Collector TP180JEL TP180JNL TP180JEF TP180JNF How to fix the water tank Water tank Self tapping screw Frame...
- Page 14 Exploded View Exploded View of Two Collectors TP300JEL TP300JNL TP300JEF TP300JNF How to fix the water tank Water tank Self tapping screw Frame...
-
Page 15: Troubleshooting
Troubleshooting Cleaning and Servicing 1.Water tank 11.Plastic end cover (optional) 2.G3/4-3/4 hex nipple 12.Safety valve 3.G3/4 fiber gasket 13.Collector union(***) 4.Solar hot pipe 14.Water tank strap(*) 5.Collector connector 15.Collector clamp(*) 6.Solar collector 16.Collector beam(*) 7.Collector end plug 17.Collector strap(*) 8.Solar cold pipe 18.Collector Frame(**) 9.Temperature and pressure valve (*):For inclined roof... - Page 16 0040503857 20150508...