La Marzocco Mazzer Major V Quick Start Manual

Mazzer Major V, Robur S and Kony S Electronic

Q

S

G

UICK

TART

UIDE

NOTE

This guide is a supplement to the full Major V, Robur S and Kony S instruction manual and the

electronic interface guide, not a replacement. Reference the instruction manual for warnings,

important safety information and more detailed instructions on using your grinder.

Grinder Overview

Installation

1. Remove grinder, hopper and accessories from box.

2. Ensure grinder is on a stable surface and install hopper onto

grinder. Ensure the tongue of the hopper slides into the slot

3. Screw the disk stopping pin into the disk stopping nut through a hole in the adjustment

disk. Screw adjustment disk handle into adjustment disk.

4. If desired, install drip tray by sliding under front of grinder until it pops into place.

5. Adjust the fork assembly to

properly fit your portafilter.

a. Place your portafilter

into the forks by

positioning the

portafilter at a slight incline until the portafilter touches the stop/activation pin

then straighten the portafilter out.

T. 206.706.9104 | F. 206.706.9106 | [email protected] | www.lamarzoccousa.com

to activate the safety

microswitch. Tighten the

hopper fixing pin to the grinder

body. Note: the grinder will not work without the hopper in

place.

La Marzocco USA | 1553 NW Ballard Way – Seattle, WA 98107

Note: hoppers designed for

the Major, Robur or Kony

are not compatible with the

Major V, Robur S or Kony

S. The tongue is not long

enough to activate the

hopper safety switch.

1