Table of Contents
GE M
S
EDICAL
YSTEMS
D
2392751-100, R
IRECTION
8-8-3
Sony VCR Replacement Procedure
NOTE:
This section describes the installation and removal procedure of the SONY SVO-9500MDP2 and
SVO-9500MD2.
The SVO-9500MDP2 (PAL) and SVO-9500MD2 (NTSC) are alike, except for the Color Signal system.
The installation procedure is the same for both models.
8-8-3-1
Tools
No special tools needed.
8-8-3-2
Manpower
One person - 30 mins.
8-8-3-3
Preparations
1) Shut down the Vivid™ 4 ultrasound unit, as described in
2.) Remove the Connectors Panels Cover as described in the
Procedure
3.) Unpack the VCR.
4.) Check that the VCR AC voltage corresponds to that of your local voltage.
5.) Verify that the switches on the VCR front panel are as shown in
If necessary, adjust accordingly.
8-126
3
EVISION
Figure 8-118 SONY Video Cassette Recorder (VCR)
on page 8 - 8.
Monitor
Ch1
Mix
Ch2
Not important.
Monitor
Mix
(Determines what is sent to MONITOR OUT jack.
Has no effect on AUDIO OUT).
Output High Fidelity audio to AUDIO OUT
Audio
Hi-Fi
CH-1/L and CH-2/R
Hi-Fi
ON
Record High Fidelity audio, if present
Figure 8-119 Sony VCR - Switches Setting (Front Panel)
Section 8-8 - Peripherals
Audio
Hi-Fi
Hi-Fi
On
Mix
Norm
Off
V
™ 4 S
IVID
Chapter 3 -
Installation.
Connector Panels Cover Removal
Figure 8-119
below.
M
ERVICE
ANUAL
Table of Contents
