To Change Password - NEC Univerge SV9500 User Manual

Hide thumbs Also See for Univerge SV9500:
Table of Contents
Press the menu button to display the menu screen.
The screen that is displayed as the portal icon in
that time is the XML application screen that
registered as the home URL.
"Portal" is usually displayed as an
application name registered by external
application.
When the home URL has registered,
the screen of home URL is displayed
instead of the favorite screen by press
the local soft key 1. Therefore, the
favorite screen cannot be displayed.
The effects of the home settings when
there is the home URL registration are
as follows:
■ Set to "Automatic"
The screen obtained from the home
URL is displayed.
■ Set to "Favorite screen"
The screen obtained from the home
URL is displayed.
■ Set to "Call screen"
The call screen is displayed.
■ Set to "Line screen"
The call screen is displayed.

TO CHANGE PASSWORD

Following explains how to change an existing
password. The password is used for the
following occasions.
To lock/unlock the terminal.
To reset the terminal settings
1.
Display the Menu screen, and select "Settings"
2.
Select " 1 User Settings".
3.
Select " 4 Change Password".
4.
Enter the old password.
The initial password is "0000". When
changing the password for the first
time, enter "0000" as the old password.
In order to ensure the security and
avoid the unauthorized use, please be
sure to change the password at the
time of initial use. The password shall
be difficult to guess from a third party.
And it shall be changed regularly to
keep security level.
5.
Enter the new password.
Up to 32 digits can be set as a
password.
6.
Enter the new password again.
7.
Press Soft key (OK).
The password entry completes
successfully.
When the password entry in failure, the
error message is displayed.
When a password has been forgotten,
please contact the system
administrator.
27
TERMINAL SETUP

Hide quick links:

Table of Contents
loading

Table of Contents