Rocker Switch 2-Way - Philips Hue User Manual

• For 2-way switching you will need 2 Hue wall switch modules.

1. Follow the same installation instructions as connecting a 1-way switch with the following

exception:

In most cases only the 3 disconnected (live) wires will have to be added to the provided

push-in wire connectors in each of the installation boxes. Never add neutral and/or

ground to the push-in wire connector.

Attention! Always make sure for all switches there is no voltage, and corresponding

circuit breaker(s) are turned off.

2. One removed original (live) wire will not be replaced with the provided wires with the

Hue wall switch module, install the provided wires according to the 1-way switch

guidance.

You will find 2-way switches typically in hallways and stairways or bigger rooms that

gives control over a light point from two positions (see image 1).

Supply

Light Bulb = ON

220 V

2-way

switch

Staircase Wiring Circuit Diagram

• Follow in the app the same installation steps for the wall module as regular 1-way

switching and select single rocker (see image 2) for both modules.

Keep the app open until the product is fully installed and you are guided to the next

screen

2-way

switch

Stairs

image 1

image 2

2x

14