Emerson RIDGID WD40700 Owner's Manual

DUE TO COVID-19 PPE MASK SUPPORT

Due to raw materials that are normally used in our production of the 3-Layer Fine Dust filter component (VF3500)

being redirected for PPE mask manufacturing support, we are unable to provide the filter previously included

with this product.

We are temporarily replacing the 3-Layer Filter (VF3500) component. We are providing you with a 1-Layer

Filter (VF3400) component and a dust collection bag. Please note the dust collection bag was not typically

included with this product purchase.

This dust bag lets you clean up small, dry debris such as drywall dust, and is an excellent containment solution

for many fine dust messes. See dust bag for installation and removal instructions and discard the bag once full.

Replacements can be purchased as VF3501.

The material used in our vacuum filters and bags is intended only to protect the vacuum and the end-users

of our products from particles or debris under operation conditions listed in the product's instruction manual.

FILTER PREVIOUSLY INCLUDED

VF3500

FOR QUESTIONS OR INFORMATION CONTACT US AT 1-800-4-RIDGID (1-800-474-3443) from the US and Canada

QUICK & EASY DRY DEBRIS DISPOSAL USING DUST BAGS

Clean Drum vs. Dirty Drum

1 - Simply spread the bag out around the inside of the drum.

2 - Push cardboard collar onto drum inlet and behind rib(s) so that cardboard is flush

against inside of drum.

3 - Replace power head with filter attached ensuring the dust bag sits surrounding the filter.

This ensures you will get the most debris inside of the dust bag and the cardboard collar of

the dust bag stays in place.

TEMPORARY COMPONENT CHANGE

SIZE C - VF3501

Dust Collection Bag Installation Instructions

Please see reverse side for French • Voir l'anglais au verso

SUBSTITUTE FILTRATION

VF3400

Easy to Install

VF3501

Easy to Dispose