Siemens SIMATIC IPC477E Operating Instructions Manual page 185
Hide thumbs
Also See for SIMATIC IPC477E:
- Operating instructions manual (188 pages) ,
- Product information (23 pages) ,
- Quick install manual (2 pages)
Table of Contents
RAL
Restricted Access Location: Installation of the device in a production facility with restricted
access, for example, a locked control cabinet.
Recovery function of the USB stick
Contains the tools for configuring hard disks and the Windows operating system.
Reset
Hardware reset: Reset/restart of the PC using a button/switch.
Restart
Warm restart of a computer without switching the power off (Ctrl + Alt + Del)
Restore function of the USB stick
The restore function is used to restore the system partition or the entire hard disk to factory
state if the system has crashed. The USB stick contains all the necessary image files and is
bootable.
ROM
Read-Only Memory ROM is a read-only memory in which every memory location can be
addressed individually. The programs or data are permanently stored and are not lost in the
event of a power failure.
S.M.A.R.T
The Self-Monitoring, Analysis and Reporting Technology (SMART or S.M.A.R.T.) is an industry
standard integrated in storage media. It makes for permanent monitoring of important
parameters and early detection of imminent problems.
SATA
Serial ATA Interface for hard disk drives and optical drives with serial data transmission rates
of up to 300 Mbps.
SETUP (BIOS Setup)
A program in which information about the device configuration (that is the configuration of
the hardware on the PC/PG) is defined. The device configuration of the PC/PG is preset with
defaults. Changes must therefore be entered in the SETUP if a memory expansion, new
modules or a new drive are added to the hardware configuration.
SIMATIC IPC477E
Operating Instructions, 11/2020, A5E37455003-AF
Glossary
185
Table of Contents
