Quick Links
HONEYCOMB SHADES
UltraLift Cordless™
GETTING STARTED
A few simple tools are required:
Steel Tape Measure
Power Drill and
Flathead & Phillips
Drill Bits
Included in your order is all the hardware necessary for a
normal installation. Depending on the mounting surface,
fasteners other than the screws provided may be required.
Wall board and plaster require the use of anchors such as
expansion or toggle bolts. Bricks, tile and stone need special
plugs and drill bits. Wood should always be pre-drilled to
avoid splitting.
Professional installation is also available in most areas,
call 800-800-3329.
STANDARD HARDWARE
Screws
Mounting Brackets
OPTIONAL HARDWARE
Extension Bracket
1 | Honeycomb Shades UltraLift Cordless™
Pencil
Level
Awl (or tool for starting
Screwdriver
a screw hole)
Spacers
Hold Down Brackets
with Screws
BRACKET INFORMATION
The brackets you received with your product are required for
proper installation. Brackets should be installed 2" from each
end. Any additional brackets will need to be evenly spaced
between the two end brackets.
INSIDE MOUNT
• The brackets are mounted flat against the top sill surface.
Place the bugle head screw through the hole closet to the
front of the bracket. To fully recess the shade requires a flat
surface with a minimum depth of 1
requires
/
" minimum.
1
2
• Additional brackets, if included, are REQUIRED for proper
installation and should be installed evenly spaced between
the two end brackets.
• Proceed to "Shade Installation".
1
/
"
3
4
/
". Shallow mountain
3
4
Related Manuals for 3 Day Blinds HONEYCOMB SHADES UltraLift Cordless
Summary of Contents for 3 Day Blinds HONEYCOMB SHADES UltraLift Cordless
- Page 1 • Additional brackets, if included, are REQUIRED for proper installation and should be installed evenly spaced between Screws the two end brackets. • Proceed to “Shade Installation”. Mounting Brackets OPTIONAL HARDWARE Spacers Extension Bracket Hold Down Brackets with Screws 1 | Honeycomb Shades UltraLift Cordless™...
-
Page 2: Outside Mount
• Make sure both brackets are slipped down all the way in the keyhole slot so that the screw is in the top portion of the keyhole slot. Install a screw in the bottom hole of each bracket. Tighten all screws. 2 | Honeycomb Shades UltraLift Cordless™... - Page 3 Push shade rail back and rotate the back of the shade down to release. • Rotate the back of the headrail down and carefully lift the headrail off of the front hooks of the mounting brackets. 3 | Honeycomb Shades UltraLift Cordless™...
-
Page 4: Optional Accessories
Spacers are available for use on windows with a projected molding. They are " thick and allow the shade to be mounted flush with the outside edge of any standard window molding. They are available by contacting our Customer Care Department at 800-800-3329. 4 | Honeycomb Shades UltraLift Cordless™... - Page 5 • Move cribs, playpens, and other furniture away from cords and bead chains. Children can climb furniture to get to cords. ANSI/WMCA A100.1-2014 5.2.3 800-800-3329 | 3dayblinds.com 5 | Honeycomb Shades UltraLift Cordless™ © 2017 3 Day Blinds LLC Part #PM-045 1/17...