Table of Contents
4 OPERATION
Table 4-2 Addresses that can be Set as I/O Area Addresses and Transfer Addresses
Address which can be set for S10mini
PI/O setting range
XW000 to XWFF0
JW000 to JWFF0
YW000 to YWFF0
QW000 to QWFF0
GW000 to GWFF0
RW000 to RWFF0
MW000 to MWFF0
DW000 to DWFFF
EW400 to EWFF0
FW000 to FWBFF
－
(Extension memory)
* The address in which extends it to other ranges or exceeds it to the setting range cannot be set.
For S10mini, please confirm whether the extension memory corresponding to a
set address is mounted when the address of the extension memory is set. The
system performance might decrease when the extension memory corresponding
to a set address is a unmounting, and mount it, please.
(7) When "MANUAL" is selected in Station type, Slot can be set. When the I/O type of Slot is
displayed as "****," this means that the slot information of this slot number is not yet
registered. Select (click) an optional slot number (/01 to /07) and click the
button.
The [Set slot information] window appears (Figure 4-9). Set each item. After completing
the setting, click the
Address setting range
/0E0000 to /0E01FE
/0E0200 to /0E03FE
/0E0400 to /0E05FE
/0E0600 to /0E07FE
/0E0800 to /0E09FE
/0E0C00 to /0E0DFE
/0E0E00 to /0E0FFE
/061000 to /062FFE
/0E1C80 to /0E1DFE
/0E2000 to /0E37FE
/100000 to /4FFFFE
(Extension memory)
NOTICE
OK
button. To cancel the setting, click the
Figure 4-9 Set Slot Information Window
Address which can be set for S10V
PI/O setting range
XW000 to XWFF0
JW000 to JWFF0
YW000 to YWFF0
QW000 to QWFF0
GW000 to GWFF0
RW000 to RWFF0
MW000 to MWFF0
DW000 to DWFFF
EW400 to EWFF0
FW000 to FWBFF
LBW0000 to LBWFFF0
LWW0000 to LWWFFFF
LXW0000 to LXW3FFF
4-14
Address setting range
/414000 to /4141FE
/0E0200 to /0E03FE
/414200 to /4143FE
/0E0600 to /0E07FE
/0E0800 to /0E09FE
/0E0C00 to /0E0DFE
/0E0E00 to /0E0FFE
/061000 to /062FFE
/0E1C80 to /0E1DFE
/0E2000 to /0E37FE
/412000 to /413FFE
/450000 to /46FFFE
/4A0000 to /4A7FFE
Set slot
Cancel
button.
Table of Contents
