Aux Control; Special Functions - Bosch MIC IP ultra 7100i User Manual

MIC IP ultra 7100i │ MIC IP starlight 7100i

Select the appropriate pre-position (1 through 6). Click

Note: If the pre-position is already stored, a dialog box displays the message, "Overwrite

current pre-position?" Click OK to overwrite, or click Cancel to cancel the operation.

Click

10.1.4

With the tab AUX Control you can enter pre-programmed keyboard control commands. These

commands are composed of a command number plus the appropriate function key (Show pre-

position, Set pre-position, AUX on, or AUX off). A valid combination either issues a command

to the device or displays an on-screen menu.

Show pre-position

Click this button to display a pre-position.

Set pre-position

Click this button to set a pre-position.

AUX on

Click this button to activate an AUX command.

AUX off

Click this button to deactivate an AUX command.

10.1.5

Scan 360°

Click this button to start a continuous 360° pan. To stop the continuous pan, click a

directional control in the View Control tab.

Autopan

Click this button to pan the camera between user-defined limits.

Tour A / Tour B

Click one of these buttons to start the continuous playback of a recorded (guard) tour. A

recorded tour saves all manual camera movements made during the recording, including its

rate of pan, tilt and zoom speeds, and other lens setting changes.

To stop a tour, click a directional control in the View Control tab.

Focus

Click this button to activate the Auto Focus One Push mode on the camera.

The OSD displays the message, "Auto Focus: ONE PUSH."

IR light

Click this button to turn on the infrared (IR) light of the illuminator accessory (if available on

your camera).

Click this button again to turn off the IR light.

White light

Click this button to turn on the White light of the illuminator accessory (if available on your

camera).

Click this button again to turn off the White light.

Custom tour

Click this button to view (in continuous playback) a custom tour that was previously

configured.

Bosch Security Systems

to display the selected pre-position in the video image.

User Manual

Operation via the browser | en

to store the pre-position.

2020-11 | 1.4 |

63