Table of Contents
MHC-V7D
Ver. 1.1
2-9.
FRONT PANEL BLOCK
2 Insert the jig into a space and slowly
remove the panel, front block.
Note 1: When using a jig, please work
so as not to injure panel, front
block and speaker cabinet.
3 All bosses are removed while moving
jig in the direction of the arrow, and
panel, front block is removed.
5 Remove the panel, front block
in the direction of an arrow.
4 Remove the wire
from the clamp.
7 panel,
front block
16
total fifteen bosses
6 terminal (narrow)
[black/yellow]
6 terminal (wide side)
1 one tapping screw
(1) (3.5 x 14)
[yellow]
2 Insert the jig into a space and slowly
remove the panel, front block.
Note 1: When using a jig, please work
so as not to injure panel, front
block and speaker cabinet.
3 All bosses are removed while moving
jig in the direction of the arrow, and
panel, front block is removed.
6 terminal (narrow)
[black/yellow]
6 terminal (wide side)
[yellow]
clamp
front panel
LOUDSPEAKER (4cm)
(Tweeter) (R-CH)
rear side
Hide quick links:
Table of Contents
