Table of Contents
Quick Links
READ AND SAVE THESE INSTRUCTIONS
29" Ceiling Fan Owner's Manual
CF702ORB05
CF702WW05
Part No. F40BP73020005
Revision: 200730
NORTHWIND
Model Numbers
Net Weight:
Questions, problems, missing parts: Before returning to the store
call Customer Service - 8 a.m. - 6 p.m., Eastern, Monday-Friday
1-800-654-3545
www.emersonfans.com
- Oil Rubbed Bronze
- Appliance White
11.2
Lbs.
™
Form No. BP7302-5
U.L. Model No.: 42-CL
Table of Contents
Related Manuals for Emerson NORTHWIND
Summary of Contents for Emerson NORTHWIND
- Page 1 READ AND SAVE THESE INSTRUCTIONS NORTHWIND ™ 29” Ceiling Fan Owner’s Manual Model Numbers CF702ORB05 - Oil Rubbed Bronze CF702WW05 - Appliance White 11.2 Net Weight: Lbs. Questions, problems, missing parts: Before returning to the store call Customer Service - 8 a.m. - 6 p.m., Eastern, Monday-Friday 1-800-654-3545 www.emersonfans.com...
-
Page 2: Table Of Contents
Additional Safety Instructions for Installation To avoid fire, shock or injury, do not use an Emerson or any other brand of control not specifically approved 1. To avoid possible shock, be sure electricity is turned for this fan. -
Page 3: Unpacking Instructions
Substitution of parts or accessories not designated for use with this product by Emerson could result in personal injury or property damage. Open carton containing fan. Remove top half of styrofoam unit. -
Page 4: Electrical Requirements
SW46 4-Speed Slide Wall Control or the SW90 Fan Up to 50 ft. & Light Dual Slide Control may be used with this 29” Northwind Ceiling Fan. The LED Light Fixtures are 50-100 ft. recommended accessories sold separately. 2. Electrical Requirements... -
Page 5: Ceiling Fan Assembly
3. Ceiling Fan Assembly GREEN GROUND WIRE Remove the Hanger Ball by loosening the Phillips Head Set Screw in the Hanger Ball until the Ball falls freely down the Downrod (Figure 1). Remove the Pin from the 3.5” Downrod, then remove 3.5"... - Page 6 3. Ceiling Fan Assembly (Continued) Loosen the Two Phillips Head Set Screws in the 3.5" DOWNROD Motor Coupler for installation of the Downrod (Figure 3). LOOSEN Seat the Downrod in the Motor Coupler (Figure 3). PHILLIPS HEAD SET SCREWS (2) Rotate and align the Downrod Holes with the Two Holes in the Motor Coupler (Figure 3).
- Page 7 3. Ceiling Fan Assembly (Continued) Place the Ceiling Cover over the Downrod (Figure 6). Be sure that the Ceiling Cover and the Coupler Cover are both oriented correctly (Figure 6). Figure 6 Route the three Motor Wires through the Hanger Ball (Figure 7).
- Page 8 Retain the Screws for future use in Step 3.11. REMOVE SWITCH HOUSING NOTE: If you are using an Emerson light fixture MOUNTING SCREWS (3) with your fan: Remove the screw plug from the bottom of the switch housing cover and install the light in accordance with the light kit Owner’s...
- Page 9 3. Ceiling Fan Assembly (Continued) 3.11 SWITCH HOUSING ASSEMBLY Position the Switch Housing Assembly on the Switch Housing Plate and align the holes in the Switch Housing Assembly with the holes in the Plate. REINSTALL Secure the Switch Housing Assembly by reinstalling MOUNTING SCREWS (3) the Three Mounting Screws (previously removed)
-
Page 10: How To Hang Your Ceiling Fan
CAUTION CEILING To reduce the risk of injury, install the fan so that the blades are at least 7 ft. (2.1m) above the floor (Figure 14). WARNING Turning off wall switch is not sufficient. To avoid possible electrical shock, be sure electricity is turned AT LEAST off at the main fuse box before wiring. - Page 11 Securely attach the Hanger Bracket to the Outlet Box using the Two Screws supplied with the Outlet Box. (Figure 16). OUTLET TWO SCREWS SUPPLIED WITH OUTLET BOX HANGER BRACKET ANTI-ROTATION TAB Figure 16 NOTE: CEILING COVER, SUPPL Y WIRES AND FAN WIRES Carefully lift the Fan and seat the Hanger Ball/ OMITTED FOR CLARITY.
-
Page 12: How To Wire Your Ceiling Fan
Emerson Electric Co. Substitution of parts or accessories not designated for use with this product by Emerson Electric Co. could result in personal injury or property damage. Securely connect the Fan Motor White Wire to the... - Page 13 5. How to Wire Your Ceiling Fan (Continued) Securely connect the Fan Motor Black Wire and Blue Wire to the Supply Black (hot) Wire using Wire FAN MOTOR Connector (supplied) (Figure 20). BLACK WIRE SUPPLY BLACK (HOT) LISTED WIRE CONNECTOR FAN MOTOR BLUE WIRE Figure 20...
-
Page 14: Final Assembly
Substitution of parts or accessories not designated • Ceiling Fan / Light Controls for use with this product by Emerson could result in • Downrod Extension Kits personal injury or property damage. WARNING... -
Page 15: Using Your Ceiling Fan
8. Using Your Ceiling Fan Restore Electrical Power to the Outlet Box by turning the Electricity on at the Main Fuse Box. Check the operation of the Fan by gently pulling on the Pull Chain Switch. During Summer Months: Run the Fan Counter- Clockwise, as you look up at it, to direct airflow REVERSE downward. -
Page 16: Repair Parts
9. Repair Parts PARTS BAG U.L. Model No.: 42-CL... -
Page 17: Maintenance
9. Repair Parts Listing Part Numbers Model No. Model No. Description CF702ORB05 CF702WW05 Hanger Ball Assembly, Consisting of: 760750-48 760750-3 Hanger Bracket (1) — — Hanger Ball (1) — — Downrod, 3.5” (1) — — Parts Bag Containing: 762908-1 762908-2 Wire Connectors (3) —... -
Page 18: Troubleshooting
11. Troubleshooting WARNING FOR YOUR OWN SAFETY TURN OFF POWER AT FUSE BOX OR CIRCUIT BREAKER BEFORE TROUBLESHOOTING YOUR FAN. TROUBLE PROBABLE CAUSE SUGGESTED REMEDY 1. Fan will not start. 1. Fuse or circuit breaker blown. 1. Check main and branch circuit fuses or circuit breakers. WARNING Make sure main power is turned OFF. -
Page 19: Ceiling Fan Limited Warranty
What We Will Do To Correct Problems: If the defect is covered by this limited warranty, Emerson will repair or replace the applicable Emerson Ceiling Fan Product at no charge to You. If repair of the Emerson Ceiling Fan Product is not practical or possible within a reasonable time and no replacement Emerson Ceiling Fan Product can be provided, Emerson will refund You the actual purchase price of Your Emerson Ceiling Fan Product. - Page 20 SERIAL NUMBER: DATE CODE: The serial number of this fan can be found on the nameplate on top of the fan housing. The date code can be found on the carton and on top of the fan housing, stamped in ink on a white label. You should record this data above and keep it in a safe place for future use.