DOK-MOTOR*-MCL********-PR05-EN-P
Rexroth IndraDyn L Ironless Linear Motors MCL
12.2
Delivery status and packaging
12.2.1
Primary parts
12.2.2
Secondary parts
Warnings on the packaging of the
secondary parts
12.3
Checking the motor components
12.3.1
Factory checks of the motor components
Electrical inspections
Mechanical inspections
The primary parts are separately packed in a cardboard box. To identify the
primary part, a type designation exist on the packaging.
The secondary parts are separately packed in a cardboard box. To identify
the secondary part, a type designation exist on the packaging.
On the packaging of the secondary parts is a self-adhesive warning sign
which indicates with the following warning notes to the dangers after opening
the package and further handling of secondary parts.
Fig. 12-5:
Warning label on the packaging of secondary parts
The self-sticking warning label (sizes approx. 110 mm x 150 mm)
can be ordered from Rexroth (MNR R911278745).
The Bosch Rexroth linear motors undergo the following electrical checks at
the factory:
●
HIgh voltage test according to DIN EN 60034-1
●
Insulation resistance test acc. to DIN EN 60204-1
●
Verification of the specified electrical characteristics
The Bosch Rexroth linear motors undergo the following mechanical tests:
●
Form and location tolerances acc. to ISO 1101
●
Construction and fits acc. to DIN 7157
●
Surface structure acc. to DIN ISO1302
●
Thread test acc. to DIN 13, Part 20
Bosch Rexroth AG
155/193
Handling, transport and storage