Stop Test Run; Final Check - Panasonic U-16GE2E5 Main Parts Replacement
Gas heat pump, 2way/3way multi/w multi
Hide thumbs
Also See for U-16GE2E5:
- Test run manual (60 pages) ,
- Manual (37 pages) ,
- Procedures and technical points for system installation (21 pages)
Table of Contents
Ignition Timing Check and Adjustment
(7) Press the SET key (S007). "
will be displayed. The LEVEL LED (D053) and
TEST/WARNING LED (D052) will be illuminated.
(8) Press the UP (S005) or DOWN (S006) key, to
display "
SET key (S007) for one second or more. The
TEST/WARNING LED (D052) will go out, and
distributor mode will be cancelled.
7. Stop test run
(1) Press the HOME key (S004) for one second or
more.
Menu item number "
displayed.
(2) Press the UP (S005) or DOWN (S006) key, displaying the menu item numbers. Select menu item
"
" in the (Figure.34.) The display "
(3) Press the SET key (S007). "
will be displayed. The LEVEL LED (D053) and
TEST/WARNING LED (D052) will be illuminated.
(4) Press the SET key (S007) for one second or more.
The TEST/WARNING LED (D052) will go out,
and the test run will be stopped.
8. Final check
(1) Running condition check
Make sure that no abnormal noise or vibration occurs.
Make sure that none of the attached parts are loose.
" (Figure.31)
" (Figure.32). Press the
" (Figure.33) will be
Figure.
34
" (Figure.36)
" (Figure.35) will appear.
32
Figure.
Figure.
31
31
Figure.
Figure.
32
32
Figure.
Figure.
33
33
Figure.
35
Figure.
Figure.
36
36
Table of Contents
