1. Manuals
  2. Brands
  3. Mitsubishi Electric Manuals
  4. Portable Generator
  5. MDS-B-SPJ2 Series
  6. Specification manual

Mitsubishi Electric MDS-B-SPJ2 Series Specification Manual page 35

Ac spindle drive unit
Hide thumbs
Table of Contents
● SJ-PF5.5-01
Terminal box
Suction
Cooling fan
M8 screw
(2 places marked with ※.)
Note 1. Leave 30mm or more between the cooling fan and
the wall.
Note 2. The vertical shaft can also be installed on the
bottom. (Use the screws marked with a
Note 3. When removing the suspension bolts during use,
close the screw hole with a bolt (M8 × 10 or less).
Terminal box
Exhaust
Cooling fan
M8 screw
(2 places marked with ※.)
Note 1. Leave 30mm or more between the cooling fan and
the wall.
Note 2. The vertical shaft can also be installed on the
bottom. (Use the screws marked with a
Note 3. When removing the suspension bolts during use,
close the screw hole with a bolt (M8 × 10 or less).
2. Specifications
The terminal box lead outlet can
be changed to the left or right.
Suspension bolt (M8 screw)
Rating nameplate
Speed detector connector
Exhaust
.)
※
Cross-section AA
The terminal box lead outlet can
be changed to the left or right.
Suspension bolt (M8 screw)
Rating nameplate
.)
※
Cross-section AA
2 − 14
(
flange
2-M6 screw, depth 12
Speed detector
connector
Suction
3-M4 × 0.7 screw, depth 10
Ground
(M5 screw)
Cooling fan motor
BU,BV
(M4 screw)
Motor U, V, W
(M5 screw)
)
2-M8 screw
Shaft end details
D90F
Ground
(M5 screw)
Cooling fan motor
BU,BV
(M4 screw)
Motor U, V, W
(M4 screw)
Shaft end details
D90T
Table of Contents
loading

Related Products for Mitsubishi Electric MDS-B-SPJ2 Series

This manual is also suitable for:

Sj-p seriesSj-pf seriesMds-b-spj2 02Mds-b-spj2 04Mds-b-spj2 075Mds-b-spj2 15 ... Show all

Table of Contents