Before Requesting Service - Sony CECHYA-0076 Instruction Manual

1

On your PS3™ system's XMB

[Manage Bluetooth ® Devices].

2

Select the headset from the list of registered devices, and then press the

3

Select [Information] from the options menu.

4

Select [Off] under [High Quality (HQ) mode].

Using the headset while placed in the charging cradle

Place the headset in the charging cradle. Turn on the PS3™ system, and then the headset. You

can change the audio output device under

Output Settings].

Hints

The High Quality (HQ) mode and use of the headset while in the charging cradle are only

ˎ

available when the headset is connected to the PS3™ system.

When the headset is placed in the charging cradle, you can use the headset even if the charging

ˎ

cradle is not connected to the PS3™ system.

When the headset is placed in the charging cradle while the headset is turned on, the message

ˎ

"Wireless headset has been disconnected. " will be shown. In that case, press the POWER

button briefly to reconnect to the PS3™ system.

Go through this section if you experience difficulty in operating the headset. Should any

problem persist, visit eu.playstation.com.

The headset cannot be turned on.

Check that the headset is fully charged.

C

The headset has quit responding.

The headset seems to be stuck in pairing mode (status indicator flashes red and blue

alternately) and cannot be turned off.

Reset the headset by inserting a small pin or similar object into the hole of the RESET button

C

and push for longer than one second.

Sound can be barely heard. The headset falls off my ear.

Check that the headset is placed correctly in your ear. See "Wearing the headset" in this

C

manual for details.

There is audio skipping in HQ mode.

Try turning off HQ mode. Some games may not provide full audio playback in HQ mode.

C

The headset does not work with my phone. My phone cannot locate the headset.

Check that the headset has been charged.

C

Confirm that your phone supports the Bluetooth ® profile that is supported by the headset.

C

Check that the headset is paired with your phone. See "Registering (pairing) the headset

C

with other Bluetooth ® devices" in this manual for details.

I am trying to pair the headset with my phone and cannot enter the PIN code.

Turn off your phone and the headset, and then turn them on again. Repeat the pairing

C

process. If necessary, enter [0000] as the PIN code or pass key.

I cannot hear other people on my headset.

Check that the headset is turned on.

C

menu, select

™

(Settings)

(Settings)

(Accessory Settings)

(Sound Settings)

button.

[Audio