Quick Links
Data and Installation
Mimic LED Driver Card
S4-34600 & S4-34494
These instructions cover the Mimic LED Driver
Card (S4-34600) and Connection converter
(S4-34494), which are designed to be used in
Custom panels.
The Mimic LED Driver connects to a Master Repeat
Card which in turn connects to a loop circuit of a
Vigilon fire system. Each Mimic LED Driver Card
can control up to 768 LEDs and this leaflet covers
the connection of up to 2 Mimic LED Driver Cards.
The Connector converters that holds the terminals
for wiring LEDs.
Custom Panel
*
No links are fitted here
for this application.
Custom Panel
Links set LED
board orientation.
Backbox
D o o r
Mimic
LED Driver
Card 2
2 4 6
Maximum of up to
1 3 5
1536 LEDs can be
controlled with
2 Mimic LED Driver
Cards
4188-951_issue 2_01/12_Part 1_Mimic LED driver
S4-34600
Mimic LED Driver Card
26-way
300mm ribbon cable
20-way
200mm Flat flexible cable
One link fitted
P3
20 way
cable
Address
B
P1
*
P3
P2
IN
OUT
BOARD
UPSIDEDOWN
ROTATE
ADDRESS
P4
P5
P11
P12
P13
P14
P15
P16
Connector
Converter 6
8
10
12 14 16 18 20 22
24
26
2 4 6
8
10
12 14 16 18 20 22
24
26
7
9
11 13 15 17 19 21
23
25
1 3 5
7
9
11 13 15 17 19 21
23
25
LED Bank 2 (768 LEDs)
A
B
LED selection
Only use high efficiency Red,
LEDs with a Mimic LED Driver Card.
"
Do not use
not suitable for use with the Mimic LED Driver Card.
Compatibility
The Mimic LED Driver Cards are compatible for use
in Vigilon system where the Control panel has
specific MCC/MCB software, see technical data
section. The Master Repeat Card is configured
using the Mimic Configuration Tool.
No link fitted
Vigilon device loop
P3
0C LC
01 L1 02 L2
P16
Address
Mimic
LED Driver
Card 1
P1
*
P3
P2
IN
OUT
BOARD
UPSIDEDOWN
ROTATE
ADDRESS
P4
P5
P11
P12
P13
P14
P15
P16
Connector
Converter 1
2 4 6
8
10
12 14 16 18 20 22
24
26
2 4 6
8
10
12 14 16 18 20 22
24
26
1 3 5
7
9
11 13 15 17 19 21
23
25
1 3 5
7
9
11 13 15 17 19 21
23
25
LED Bank 1 (768 LEDs)
by Honeywell
S4-34494
Connection Converter
Amber
or
Green
Blue
or
White
LEDs as these are
To mains fused spur unit
N
L
L
B
0C LC
01 L1 02 L2
P16
FS4
RESET
WRITE PROTECT
P4
L
P8
P2
SW3
DANGER
P1
BUZZER
DISABLE
WD1
P7
FS3
P14
USB
2A(QB)
PB2
-
+
0V 24V
RS485
Mimic Repeat Card
A
26 way
cable
+
-
+
P9
P9
N N
P17
DANGER
N
DANGER
DO NOT
REMOVE
WARNING
Removal of
cover exposes
live parts
FS2
P5
-
1
Related Manuals for Honeywell GENT Mimic LED Driver Card
Summary of Contents for Honeywell GENT Mimic LED Driver Card
- Page 1 Data and Installation Mimic LED Driver Card by Honeywell S4-34600 & S4-34494 S4-34600 S4-34494 Mimic LED Driver Card Connection Converter 26-way 300mm ribbon cable 20-way 200mm Flat flexible cable These instructions cover the Mimic LED Driver LED selection Card (S4-34600) and Connection converter...
- Page 2 Data and Installation Mimic LED Driver Card Mounting It is recommended that the Mimic LED Driver Cards are mounted inside a Custom panel using suitable PCB standoffs, there are 6-3mm PCB fixing holes provided on the card. The Connection converters are mounted on 35mm DIN rails.
- Page 3 Mimic LED Driver Card Data and Installation To connect multiple Mimic LED Driver Cards You can daisy chain up to two Mimic LED driver cards to the Master Repeat Card using the 20 way flat flexible cable Mimic LED Driver Mimic LED Driver Master Repeat Card Card 2...
-
Page 4: Technical Data
Do not burn. Gent by Honeywell reserves the right to revise this publication from time to time and make changes to the content hereof without obligation to notify any person of such revisions of changes. - Page 5 Commissioning information Mimic LED Driver Card by Honeywell S4-34600 & S4-34494 The illumination of LEDs connected to the Connection Converters of a Mimic LED Driver Card is determined by the configuration held at the Master Repeat Card (MRC). The following information show how to load a LED Driver template file and associate LED shapes with terminals of Connection converter and configure each LED shape with a system event using the Mimic Configuration tool.
-
Page 6: Commissioning Information
Test the Custom panel and ensure it gives the correct indication for the configured Vigilon System event. Gent by Honeywell reserves the right to revise this publication from time to time and make changes to the content hereof without obligation to notify any person of such revisions of changes.