Connecting The Appliance; Getting To Know Your Appliance - Bosch KSL Series Instructions For Use Manual

Hide thumbs Also See for KSL Series:
Table of Contents
Available languages

Available languages

en
Connecting
the appliance
After installing the appliance, wait at least
1 hour until the appliance is switched on.
During transportation the oil in
the compressor may have flowed into
the refrigeration system.
Before switching on the appliance for
the first time, clean the interior of
the appliance (see chapter "Cleaning
the appliance").
Electrical connection
The socket must be near the appliance
and also freely accessible following
installation of the appliance.
The appliance complies with the
protection class I. Connect the appliance
to 220–240 V/50 Hz alternating current
via a correctly installed socket with
protective conductor. The socket must
be fused with a 10 to 16 A fuse.
For appliances operated in non-
European countries, check whether the
stated voltage and current type match
the values of your mains supply. This
information can be found on the rating
plate. Fig. .
m
Warning
Never connect the appliance
to electronic energy saver plugs.
Our appliances can be used with mains
and sine-controlled inverters. Mains-
controlled inverters are used
for photovoltaic systems which
are connected directly to the national
grid. Sine-controlled inverters must be
used for isolated applications (e.g. on
ships or in mountain lodges) which are
not connected directly to the national
grid.
26
Getting to know your
appliance
Please fold out the illustrated last page.
These operating instructions refer
to several models.
The features of the models may vary.
The diagrams may differ.
Fig. !
A
Freezer section
B
Refrigerator compartment
1-5
Controls
6
Light
7
Bottle shelf
8
Glass shelf in the refrigerator
compartment
9
Silicone mat
10
Vegetable container with humidity
control
11
Height-adjustable feet
12
Door shelf
13
Shelf for large bottles
Table of Contents
loading

Table of Contents