Honeywell Notifier ACPS-610/E Manual page 31

Programming the ACPS-610

Label

For greater ease of identification, you may create a label for each power supply. Labels may

have a maximum of 40 characters.

Battery Charger

Choose the appropriate battery charger current for the system's battery capacity. Refer to

Section 5.2, "Calculating the Battery Requirements", on page 49 for more information on

determining your system's battery capacity.

There are three charger current options. Select

Select

supply will not be connected to any batteries or when the batteries will be powered by an

external charger (See page 23).

NOTE: When the battery charger is disabled, the power output continuous current is 2.5 Amps.

ACPS-610/E Manual — P/N 53018:A1 07/31/2007

Figure 3.4 PK-PPS: Label

Figure 3.5 PK-PPS: Battery Charger

to charge 56 to 200 AH batteries. Select

5A C

HARGE

Configuration and Programming

2A C

to charge 12 to 55 AH batteries.

HARGE

D

C

ISABLE

HARGER

when the power

31