Reg Inc Message Fields - HP 8920A User Manual
Rf communications test set
Hide thumbs
Also See for 8920A:
- Application handbook (322 pages) ,
- Application handbook (319 pages) ,
- Programmer's manual (607 pages)
Table of Contents
Chapter 6, Call Processing Subsystem
CALL BIT Screen Message Field Descriptions
RSVD
END
OHD
Parity
REG INC Message Fields
Figure 40
REG INC Message Fields
T1T2
206
S:\HP892XX\USRGUIDE\manual\callscrn.fb
Reserved for future use, all bits must be set as indicated.
End indication field.
•
Set to 1 to indicate the last word of the overhead message train.
•
Set to 0 if not the last word.
This field displays the overhead message type.
•
A '100' indicates a global action message.
•
A '110' indicates this is the first word of the system parameter overhead parameter
message.
•
A '111' indicates this is the second word of the system parameter overhead message.
Parity field. The contents of the Parity field cannot be set by the user. The Test Set
calculates the parity bits.
This field identifies the received message as an order confirmation, an order, or a
called address message.
- Quick Links:
- Table of Contents
Hide quick links:
Table of Contents
