Display Stamping - Bosch FLEXIDOME IP 3000i IR User Manual

16

en | Configuration

First, check the time zone setting. If it is not correct, select the appropriate time zone and

click Set.

1.

2.

3.

4.

5.

6.

7.

Time server address

The unit can receive the time signal from a time server using various time server protocols and

then use it to set the internal clock. The device polls the time signal automatically once every

minute.

Enter the IP address of a time server.

Overwrite by DHCP

Select this checkbox to have the DHCP server give the time server date.

Time server type

–

–

–

Click Set to apply the changes.

4.1.4

Various overlays or stamps in the video image provide important supplementary information.

These overlays can be enabled individually and arranged on the image in a clear manner.

Camera name stamping

Select the position of the camera name overlay in the drop-down box. It can be displayed at

the Top, at the Bottom, or at a position of choice using the Custom option, or it can be set to

Off for no overlay information.

If the Custom option is selected, enter values in the X and Y position fields.

Optionally, tick the Underlay with full-width black bar box to place a black bar beneath the

time stamp.

Logo

To place a logo on the image, select and upload an uncompressed .bmp file with a maximum

size of 300x300 pixels and 256 colors to the camera. Its position on the image can then be

selected.

Logo position

This option becomes available when the Camera name stamping option is enabled. Select:

–

–

–

2020-01 | V02 | DOC

Click Details to edit the DST table.

Click Generate to fill the table with the preset values from the unit.

Click one of the entries in the table to make changes. The entry is highlighted.

Click Delete to remove the entry from the table.

Choose other values from the list boxes under the table, to change the selected entry.

Changes are immediate.

If there are empty lines at the bottom of the table, for example after deletions, add new

data by marking the row and selecting values from the list boxes.

When finished, click OK to save and activate the table.

Select Time protocol if the server uses the RFC 868 protocol.

Select the protocol that is supported by the selected time server. It is recommended to

select the SNTP protocol protocol. This protocol provides high accuracy and is required

for special applications and future function extensions.

Select the TLS protocol if the server uses the RFC 5246 protocol.

Off : This option is disabled.

To the left of the name: The logo will be positioned to the left of the Camera name

stamping

To the right of the name: The logo will be positioned to the right of the Camera name

stamping

FLEXIDOME IP 3000i IR | FLEXIDOME IP micro

3000i | DINION IP 3000i IR | FLEXIDOME IP turret

User manual

3000i IR

Bosch Security Systems B.V.