Table of Contents
Refer to the CARESCAPE Network Configuration Guide for details on configuring the
CARESCAPE Network.
The iPanel application, viewable from one of the monitor's display screens, gives access to
desktops created by the hospital IT. These desktops provide patient information from other
systems that may be installed at the hospital [e.g., Centricity Clinical Information View
(Centricity CIV), MUSE Web, and Picture Archiving Communications System (PACS)]. Desktops
can be created with customer defined resolutions using the hospital-wide login and
identification process. The iPanel application is used through a Citrix thin client on the monitor
so no additional equipment is required at the bedside.
3.2.8 Unity Network ID connectivity device
The Unity Network ID connectivity device acquires digital data from up to eight peripheral
bedside devices (not necessarily manufactured by GE), processes this data and transmits the
formatted data to the patient monitor.
The supported interfaces include anesthesia machines, ventilators, gas analyzers, continuous
cardiac output devices, pulse oximeters, transcutaneous monitors and point-of-care blood gas
monitors.
Refer to the Unity Network Interface Device (ID) Operator's Manual and the patient monitor's
supplemental information manual for a list of compatible peripheral devices and to the patient
monitor's user's manual for the peripheral device parameter data displayed on the patient
monitor.
3.2.9 Displays
The patient monitor supports up to three independently configurable displays.
System introduction
15
2106778-001
Table of Contents
Troubleshooting
