Rs-232C Setting - Toshiba B-EP2DL Series System Mode Manual
Hide thumbs
Also See for B-EP2DL Series:
- Owner's manual (37 pages) ,
- Maintenance manual (30 pages) ,
- Option installation manual (24 pages)
Table of Contents
4. SYSTEM MODE (For Service Persons and System Administrators)
4.9.4 RS-232C Setting
(1) RS-232C Baud Rate setting (SPEED)
This parameter is to choose a baud rate of the RS-232C interface. When the printer communicates with a
host computer by serial interface, be sure to match the setting with the host.
[FEED]
[PAUSE]
Notes:
1.
When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE]
key is pressed.
2.
When the [FEED] and [PAUSE] keys are simultaneously pressed, the display returns to the system
mode menu.
3.
When the [FEED] key or [PAUSE] key is pressed for 0.5 seconds or more during this setting, repeat
mode is enabled and the key pressed is repeatedly entered.
4.
The change in the parameter setting becomes effective when the [POWER] key is pressed after
setting, then stored in the backup memory.
(2) RS-232C Parity setting (PARITY)
This parameter is to choose the parity of the RS-232C interface.
[FEED]
[PAUSE]
Notes:
1.
When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE]
key is pressed.
2.
When the [FEED] and [PAUSE] keys are simultaneously pressed, the display returns to the system
mode menu.
3.
When the [FEED] key or [PAUSE] key is pressed for 0.5 seconds or more during this setting, repeat
mode is enabled and the key pressed is repeatedly entered.
4.
The change in the parameter setting becomes effective when the [POWER] key is pressed after
setting, then stored in the backup memory.
SPEED
9600
SPEED
19200
SPEED
38400
SPEED
57600
SPEED
115200
PARITY
EVEN
SPEED
NONE
9600 bps (Factory default)
19200 bps
38400 bps
57600 bps
115200 bps
EVEN (Factory default)
NONE
4- 84
EO13-33005
4.9 Interface Setting
Hide quick links:
Table of Contents
