Equalizer - Blaupunkt New Orleans MD70 Operating And Installation Instructions
Blaupunkt car audio/video operating and installation instructions md70
Hide thumbs
Also See for New Orleans MD70:
- Operating instructions manual (29 pages) ,
- Installation instructions manual (7 pages) ,
- Service manual (16 pages)
Table of Contents
Select "PRESET" with the
ton, 7.
To select the preset tone, press the
button, 7.
Press the OK button, 5.
When you have completed all the set-
tings, press the DEQ button, 6.
While you set the equalizer, the level meter in
the display gives you a symbolic indication of
volume and settings.
At other times, the level meter can be switched
to spectrometer display mode.
Tone impression/problem
Bass too quiet
Bass sounds muddy
Booming tone
Unpleasant pressure
Tone lacks depth,
is aggressive, no stereo effect.
Muffled tone
Lack of clarity
Instruments have no brightness
26
or
but-
Press the MENU button, 8.
or
"MENU" appears in the display.
Press the
as is necessary for "PEAK ON" or
"PEAK OFF" to appear in the display.
Press the
to switch the spectrometer on or off.
Press the OK button, 5 or the MENU
button, 8, to leave the menu. The set-
tings are then saved.
Action
Bass boost with
Filter: "LOW EQ"
Frequency: 50 to 100 Hz
Level :+4 to +6 dB
Reduce lower middle tones with
Filters: "LOW EQ", "MID EQ"
Frequency: 125 to 400 Hz
Level : approx. -4 dB
Reduce middle tones with
Filters: "MID EQ", "HIGH EQ"
Frequency: 1,000 to 2,500 Hz
Level : -4 to -6 dB
Boost treble tones with
Filter: "HIGH EQ"
Frequency: approx. 12,500 Hz
Level : +2 to +4 dB
button, 7, as often
or
buttons, 7, in order
or
Table of Contents
