OPERATING ELEMENTS button for opening the control unit Button for switching the device on and off and for muting the device Volume control Softkeys. The function of the Softkeys depends on the contents of the dis- play at the time OK button for confirming menu entries and for leaving the menu DEQ button for calling up the equaliz-...
New Orleans MD70: CDC A 06, CDC A 08, CDC A 072 and IDC A 09. If an adapter cable is used (Blaupunkt No. 7 607 889 093) the CDC A 05 or CDC A 071 CD changers can also be connected.
Two KeyCards are included with your car ra- dio. If one KeyCard is lost or damaged you can obtain a replacement through your Blaupunkt dealer. If you use two KeyCards, the settings of the first KeyCard are adopted by the first Key- Card.
THEFT PROTECTION To “train” a new KeyCard in case of loss or damage: Insert the first KeyCard and switch the device on. Press the MENU button, 8. button, 7, until Press the “LEARN KC” appears in the display. button, 7. Press the “CHANGE”...
THEFT PROTECTION Display Radio Passport Data Using the KeyCard supplied, you can view Radio Passport data such as device name, type number (7 6 ...) and device number in the display. Press the MENU button, 8. button, 7, until Press the “READ KC”...
VOLUME Adjusting the volume The volume can be adjusted in steps from 0 (off) to 66 (maximum). To increase the volume, turn the volume control to the right. To reduce the volume, turn the volume control to the left. Adjusting the switch-on volume The volume level of the device when it is switched on can be adjusted.
Tone and volume Note: You can make separate adjustments to the bass, treble and loudness for each audio source. Adjusting the bass Press the AUD button, 9. “BASS” appears in the display. buttons, 7, in order Press the to adjust the bass. When you have finished the adjustment Press the AUD button, 9.
DISPLAY Adjusting the display You can adjust the display to its location in your vehicle and to your taste. Adjusting the viewing angle Press the MENU button, 8. button, 7, as often Press the as is necessary for “ANGLE” to appear in the display.
Radio Operation Switching to Radio Mode If the car radio is in another operating mode: Press the TUNE button, >. RDS Function This device is equipped with an RDS radio receiver. Some FM stations transmit a signal in addition to the program itself containing information such as the name of the station and the type of program (PTY).
RADIO OPERATION Setting the station There are a number of ways to set the sta- tion. Automatic station search button, 7. Press the The next station that can be received is tuned Manual station tuning You can also tune to the station manually: button, 7.
Scanning through stations Scanning through available stations (Radio SCAN) You can listen to short samples of all current- ly receivable stations. The length of the sam- ples can be set, in the menu, to between 5 and 30 seconds. Start radio SCAN To start the radio scan: Press the TUNE button, >, when the radio is operating.
RADIO OPERATION As soon as a station of the selected type is found, the device switches from the present station, or out of CD, cassette tape, MiniDisc or CD changer mode (depending on how your radio is equipped) to the station with the se- lected program type.
Press the OK button, 5 or the MENU button, 8, to leave the menu. The set- tings are then saved. Bandwidth selection in the presence of interference (SHARX) The SHARX function enables you to minimize interference from neighbouring stations. Switch on the SHARX function when stations are crowded.
MINIDISC OPERATION MiniDisc operation You can use this equipment to play any stan- dard MiniDisc. Starting MiniDisc operation, Inserting MiniDisc If there is no MiniDisc in the disc-drive: button, 1. Press the The console opens. Gently push the MiniDisc with the print- ed side upwards into the drive until you feel it stop.
Repeating tracks Press the softkey, 4, indicating “RPT”. “RPT TRCK” appears briefly in the display. The track is repeated until RPT is deactivat- Ending REPEAT Press softkey, 4, indicating “RPT” again. “RPT OFF” appears briefly in the display. Play- ing continues as normal. Changing display contents: MD text During operation, you can choose between...
(optional) On page 6 of this guide you can find which CD changers can be used with this device. You can also refer to your Blaupunkt dealer. Note: The operating instructions for your CD chang- er will provide information about handling CDs,...
Changing the display contents You can choose between different display modes during CD changer operation: Display of CD number, track number and time. Display of CD number, track number and playing time. Display of CD name and track number. In order to change between the display modes, press the DIS button, :, as of- ten as you need for the desired informa- tion to be shown on the display.
CD CHANGER OPERATION Naming CDs In order to recognise your CDs more effec- tively, the car radio allows you to give individ- ual names to up to 99 CDs. The names may have a maximum of seven characters. If you attempt to assign more than 99 names, the display will show “FULL”.
Select your first favourite track. Hold down the softkey, 4, indicating “TPM” for longer than one second. The track is accepted into the list of favourite tracks for this CD. Continue in the same way for all the oth- er favourite tracks on the CD. Switching favourite track play on and off In order to begin playing the programmed favourite tracks on the inserted CD, or to stop...
TIME CLOCK - Time Setting the time The clock time can be automatically set by means of the RDS signal. If you cannot re- ceive an RDS station, or if the RDS station to which you are listening does not support this function, it is also possible to set the time manually.
Equalizer This device has a parametric digital equaliz- er. In this case, parametric means that in each of the three filters, one individual frequency can be emphasised or reduced (with a gain of +8 to -8 dB). The following filters are available: LOW EQ 32 - 200 Hz MID EQ...
EQUALIZER Select “PRESET” with the ton, 7. To select the preset tone, press the button, 7. Press the OK button, 5. When you have completed all the set- tings, press the DEQ button, 6. Level meter / Spectrometer While you set the equalizer, the level meter in the display gives you a symbolic indication of volume and settings.
You can use the connections provided on your car radio to connect an external pre-amplifier and a subwoofer. We recommend that you use matching prod- ucts from the Blaupunkt or Velocity ranges. Switch-on delay for external pre- amplifiers To prevent speakers from crackling when you...
TECHNICAL DATA Technical data Amplifier Output power: 4 x 25 Watt sine wave according to DIN 45 324 at 14. 4 V 4 x 45 Watt max. power Tuner Wavebands: FM : 87.5 – 107.9 MHz AM : 530 – 1,710 kHz FM frequency response: 30 - 15,000 Hz Frequency response:...