Table of Contents
In addition to the CD changer it is also
possible to connect another external au-
dio source to the line output. These
sources can include a portable CD play-
er, MiniDisc player or MP3 player.
If you have not connected a CD chang-
er, it is possible to connect two external
audio sources.
You must activate the AUX output in the
menu.
If you would like to connect another ex-
ternal audio source, you will require an
adapter cable. This adapter cable can
be ordered from any authorized Blau-
punkt dealer.
Press MENU 8.
"MENU" will appear in the display.
: repeatedly until "AUX-
Press
IN-1 OFF" or "AUX-IN-1 ON" ap-
pears in the display.
In place of the "1", there is a "2" for the
second AUX input. If you have connect-
ed a CD changer, then only AUX "2" can
be selected.
: to switch AUX on
Press
or
or off.
Once you have completed your
selections, press MENU 8 or
OK ;.
Note:
If the AUX input has been switched ON,
you can select it by pressing CD•C @.
Output power:
4 x 25 watts RMS
acc. to DIN 45 324
at 14.4 V
4 x 40 watts max.
power
Wavebands:
FM:
87.5 - 107.9 MHz
AM:
530 - 1710 kHz
FM Mono sensitivity:
7.8 dBf
FM frequency response:
30 - 15000 Hz
Signal-to-noise ratio:
96 dB
Frequency response:
20 - 20000 Hz
4 channels:
4 V
Subject to technical modification!
25
- Quick Links:
- Installation
- Installation Instructions
Hide quick links:
Table of Contents
