Table of Contents
Switching REGIONAL on/off
u
Press the MENU button :.
u
Press the
or
ly until "REG" appears on the display.
"OFF" or "ON" is displayed alongside
"REG".
To switch REGIONAL on/off,
u
press the or
Press the MENU button :.
u
Selecting the waveband/memory
bank
This device can receive programmes broad-
cast over the FM frequency range as well as
the MW and LW (AM) wavebands. There are
three memory banks available for the FM
waveband (FM1, FM2 and FMT) and one
for each of the MW and LW wavebands.
Five stations can be stored in each memory
bank.
To switch between the FM memory banks
(FM1, FM2 and FMT) and the MW and LW
wavebands,
u
briefl y press the BND/TS ? button.
Tuning into a station
There are various ways of tuning into a sta-
tion.
Automatic station seek tuning
u
Press the
or
The radio tunes into the next receivable sta-
tion.
button 6 repeated-
button 6.
button 6.
Tuning into stations manually
You can also tune into stations manually.
Note:
You can only tune into stations manu-
ally if the RDS function is deactivated.
u
or button 6.
Press the
Browsing through broadcasting
networks (FM only)
If radio stations provide several pro-
grammes, you have the option of browsing
through these so-called "broadcasting net-
works".
Note:
The RDS function must be activated be-
fore you can use this feature.
u
Press the
or
to the next station on the broadcasting
network.
Note:
When using this feature, you will only
be able to switch to stations that you
have received once before already. To
receive the stations, use the Scan or
Travelstore function.
Setting the sensitivity of station
seek tuning
You can choose whether the radio should
only tune into stations providing good re-
ception or whether it can also tune into
those with a weak reception.
u
Press the MENU button :.
u
Press the
or
until "SENS" and the currently set value
appears on the display.
Radio mode
button 6 to switch
button 6 repeatedly
39
Hide quick links:
Table of Contents
