Table of Contents
TELEPHONE SETTINGS
Press CLR repeatedly until you return
to the main menu or press and hold
down CLR for longer than one second
to return to the DSC menu.
Adjusting the hands-free volume
The hands-free volume can be adjusted in
stages from 0 to 63.
In the telephone mode, press OK.
The DSC menu will appear in the display. The
will mark Setup .
cursor
Press OK.
The Setup menu will appear in the display.
The cursor
will mark Volume .
Press OK.
Press
to select Handsfree .
Press OK.
You will hear the phone ring at the volume
currently selected.
Press / or turn the volume control
knob to select the desired volume.
Press OK.
You will return to the Volume menu.
Press CLR repeatedly until you return
to the main menu or press and hold
down CLR for longer than one second
to return to the DSC menu.
Adjusting the handset volume (handset
optional)
The handset volume can be adjusted in
stages from 1 to 8. This menu item will not be
available unless the optional handset has
been connected.
In the telephone mode, press OK.
The DSC menu will appear in the display. The
cursor
will mark Setup .
Press OK.
The Setup menu will appear in the display.
will mark Volume .
The cursor
Press OK.
24
Press
to select Handset .
Press OK.
On the handset, you will hear the phone ring
at the volume currently selected.
Press / or turn the volume control
knob to select the desired volume.
Press OK.
You will return to the Volume menu.
Press CLR repeatedly until you return
to the main menu or press and hold
down CLR for longer than one second
to return to the DSC menu.
Traffic announcements (TA)
during hands-free operation
You can select whether you want traffic mes-
sages to be put through or held back while
you are using the phone.
In the telephone mode, press OK.
The DSC menu will appear in the display. The
cursor
will mark Setup .
Press OK.
to select TA / Call .
Press
Press OK.
The TA DURING CALL menu will appear in
the display.
to select the desired option On
Press
or Off .
Press OK.
If you have selected On , you must also se-
lect the channel over which the traffic infor-
mation will be emitted.
Press
to make the desired setting
Left or Right .
Press OK.
You will return to the Setup menu.
Press CLR repeatedly until you return
to the main menu or press and hold
down CLR for longer than one second
to return to the DSC menu.
Hide quick links:
Table of Contents
