Siemens SINUMERIK Series Operating Manual page 442
Milling
Hide thumbs
Also See for SINUMERIK Series:
- Function manual (956 pages) ,
- Function manual (62 pages) ,
- Function manual (204 pages)
Table of Contents
Programming technological functions (cycles)
10.2 Milling
Machining type
You can select the machining mode for milling the circular spigot as follows:
● Roughing
Roughing involves moving round the circular spigot until the programmed finishing
allowance has been reached.
● Finishing
If you have programmed a finishing allowance, the circular spigot is moved around until
depth Z1 is reached.
● Chamfering
Chamfering involves edge breaking at the upper edge of the circular spigot.
Procedure
Parameters in the "Input complete" mode
Parameters, G code program
Input
PL
Machining plane
Milling direction
RP
Retraction plane
SC
Safety clearance
F
Feedrate
442
1.
The part program or ShopMill program to be processed has been created
and you are in the editor.
2.
Press the "Milling" softkey.
3.
Press the "Multi-edge spigot" and "Circular spigot" softkeys.
The "Circular Spigot" input window opens.
● complete
mm
mm
*
Parameters, ShopMill program
T
Tool name
D
Cutting edge number
F
Feedrate
S / V
Spindle speed or constant cutting
rate
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
mm/min
mm/tooth
rpm
m/min
Milling
Table of Contents
