Table of Contents
Available languages
Available languages
3.
Position the weigh beams so that the center of the scale idler is centered between
the adjacent approach and retreat idlers.
Ensure that the scale is centered and square to the stringers.
belt
travel
belt
travel
A3
approach idlers
4.
Mark the position of the weigh beams and make new mounting holes suited for M12
or ½" bolts. (Refer to
5.
Place the scale on the conveyor stringers with the arrows on the weigh blocks
pointing in the direction of belt travel (retreat idlers). Mount the modified idler onto
the scale using the clamping brackets.
clamping
brackets
7ML19985HN61
n
A2
A1
Outline Dimensions
MCS Belt Scale – INSTRUCTION MANUAL
n
R1
R2
retreat idlers
location of removed idler
on page 5.)
R3
Page 13
Table of Contents
