Table of Contents
Cisco 7200 Series and the 2CT1 Port Adapter
Proceed to the following section to configure the new interfaces.
Configuring 2CT1 Interfaces
If you installed a new 2CT1 or if you want to change the configuration of an existing interface, you
must use the privileged-level configure command. If you replaced a 2CT1 port adapter that was
previously configured, the system will recognize the new 2CT1 port adapter interfaces and bring
each of them up in their existing configuration.
After you verify that the new 2CT1 port adapter is installed correctly (the enabled LED goes on),
use the configure command to configure the new interfaces. Be prepared with the information you
will need, such as the following:
•
•
•
•
•
•
Note
interpreter, which usually requires password access. See the previous section "Using the EXEC
Command Interpreter" and contact your system administrator, if necessary, to obtain access.
Table 6
Keywords by Area
Australia
basic-ts013
Europe
basic-1tr6
basic-nwnet3
basic-net3
basic-net5
primary-net5
vn2
vn3
Japan
ntt
primary-ntt
38 Channelized T1 Port Adapter Installation and Configuration
When you enter the correct password, the system displays the privileged-level system
prompt (#):
Router#
ISDN switch type, when configuring ISDN PRI ( lists ISDN service provider
switch types)
T1 information, for example, clock source, line code, framing type, and so on
Channel group and PRI group information and timeslot mapping
Protocols and encapsulations you plan to use on the new interfaces
Protocol specific information, such as IP addresses, if you plan to configure the interfaces for IP
routing
Whether the new interface will use bridging
Configuration commands are executed from the privileged level of the EXEC command
ISDN Service Provider Switch Types
Switch Type
Australian TS013 switches
German 1TR6 ISDN switches
Norwegian NET3 ISDN switches (phase 1)
NET3 ISDN switches (UK, Denmark, and other nations);
covers the Euro-ISDN E-DSSI signaling system)
NET5 switches (UK and Europe)
European ISDN PRI switches (UK and Europe)
French VN2 ISDN switches
French VN3 ISDN switches
Japanese NTT ISDN switches
Japanese ISDN PRI switches
Chapters
Table of Contents
