Opening And Closing The Unit; To Open The Indoor Unit - Daikin Altherma 3 R F Installation Manual
Hide thumbs
Also See for Altherma 3 R F:
- Installer's reference manual (312 pages) ,
- User reference manual (64 pages) ,
- Installation manual (48 pages)
Table of Contents
WARNING
▪ Do NOT pierce or burn.
▪ Do NOT use means to accelerate the defrosting
process or to clean the equipment, other than those
recommended by the manufacturer.
▪ Be aware that R32 refrigerant does NOT contain an
odour.
WARNING
The appliance shall be stored so as to prevent mechanical
damage and in a well-ventilated room without continuously
operating ignition sources (example: open flames, an
operating gas appliance or an operating electric heater).
WARNING
Make sure installation, servicing, maintenance and repair
comply with instructions from Daikin and with applicable
legislation (for example national gas regulation) and are
executed only by authorised persons.
NOTICE
▪ Pipework shall be protected from physical damage.
▪ Installation of pipework shall be kept to a minimum.
NOTICE
▪ Do NOT re-use joints which have been used already.
▪ Joints made in installation between parts of refrigerant
system shall be accessible for maintenance purposes.
3.2
Opening and closing the unit
3.2.1
To open the indoor unit
Overview
1
3
5
2
4
1
Top panel
2
Upper front panel
3
Switch box cover
4
Front panel
5
High voltage switch box cover
Open
1 Remove the top panel.
EHFH03S18DJ3V
Daikin Altherma 3 R F
4P596803-1 – 2019.10
5×
T25
2 Remove the upper front panel. Open the hinges at the top and
slide the top panel upwards.
3 Remove the switch box cover.
4×
T25
4 If necessary, remove the front plate. This is, for example,
necessary in the following cases:
▪
"3.2.2 To lower the switch box on the indoor
▪
"3.3.2 To connect the drain hose to the
▪ When you need access to the high voltage switch box
3 Unit installation
unit" [ 4 6]
drain" [ 4 7]
Installation manual
5
Hide quick links:
Table of Contents
