Idis DA-CM1400 Installation Manual

DA-CM1400 INSTALLATION MANUAL

Mounting

Mount the bracket to the I-beam as follows:

1

Mount the bracket to the I-beam by using

the clamp plates and screws.

2

Insert cables from external devices,

network and power adapter into bracket.

3

Assemble the pipe into the bracket.

Connect your camera to the bracket as follows:

4

Connect the camera to the pipe by turning the universal

nut.

Do not turn the camera but turn the

universal nut when connecting the camera

to the pipe, otherwise, the cable will be

twisted.

5

Turn on power.

This manual is intended for users of the DA-CM1400 ceiling mounting

bracket. It includes instructions for mounting the DA-CM1400 ceiling

mounting bracket to an I-beam.

• This bracket is intended to be used with DC-S series model of

cameras. Do not use it with other models of cameras.

• This installation should be performed by a qualified service

personnel in conformance to all local codes.

• You may need to reinforce the I-beam. If the I-beam is not strong

enough to support the camera, the camera may fall.

• Do not use this product for other purposes.

I-Beam

Clamp Plate

Bracket

Cable

Pipe

Pipe

Universal Nut

Cable

Camera

Clamp Plate

NPT 1-1/2"

(12.7mm)