Idis DA-MA2100 Installation Manual

DA-MA2100 INSTALLATION MANUAL

Mounting

Mount the bracket to the ceiling pipe(DA-CM2050) or wall mounting bracket(DA-WM2050)

as follows:

Screw Set M8X8, 2EA

Bracket

Connect your camera to the bracket as follows:

3

Screw the bottom cover onto bracket.

This manual is intended for users of the DA-MA2100 mounting bracket. It

includes instructions for mounting DA-MA2100 to DA-CM2050 or DA-WM2050.

• This bracket is intended to be used with a specific model of camera.

Do not use it with other models of cameras except for those

approved by the dealer or distributor.

• This installation should be performed by a qualified service

personnel in conformance to all local codes.

• You may need to reinforce the ceiling. If the ceiling is not strong

enough to support the camera, the camera may fall.

• Do not use this product for other purposes.

Ceiling Pipe

(DA-CM2050)

Bracket

Bottom

cover

Wall Mounting Bracket

(DA-WM2050)

Bracket

1

Insert cables from external devices, network and

power adapter into bracket.

2

Assemble bracket into the ceiling pipe (DA-

CM2050) or wall mounting bracket(DA-WM2050)

and fix it by using the screws. The ceiling pipe

and wall mounting bracket are sold separately.

Cable

Bracket

Bottom

cover