Table of Contents
BEFORE DRIVING
To change the old transmitter codes in
your vehicle's memory
If you have lost one of the transmitters, you
should change the transmitter codes in
your vehicle's memory as soon as possible
for security.
To remove one of the transmitter codes
from your vehicle's memory, first replace all
three of the transmitter codes in your vehi-
cle's memory, then program additional
transmitters as follows:
1) Program one of your transmitters three
times, by repeating the programming
procedure shown in this section. This
will replace all the old transmitter codes
in the vehicle's memory with the code
for the transmitter you are using.
2) If you want to program up to two addi-
tional transmitters, repeat the program-
ming procedure shown in this section.
3) Make sure that the keyless entry sys-
tem operates properly by operating
each transmitter.
2-13
1. For USA
This device complies with Part 15 of the
FCC Rules. Operation is subject to the fol-
lowing two conditions:
1) This device may not cause harmful
interference, and
2) This device must accept any interfer-
ence received, including interference
that may cause undesired operation.
NOTE:
Changes or modifications not expressly
approved by the party responsible for com-
pliance could void the user's authority to
operate the equipment.
2. For Canada
This device complies with Industry Canada
Standard RSS-210. Operation is subject to
the following two conditions:
1) This device may not cause interference,
and
2) This device must accept any interfer-
ence, including interference that may
cause undesired operation of the
device.
The term "IC:" before the certification/reg-
istration number only signifies that the
Industry Canada technical specifications
were met.
Child Lock System (rear doors)
EXAMPLE
Each of the rear doors is equipped with a
child lock which can be used to help pre-
vent unwanted opening of the door from
inside the vehicle. When the lock lever is in
the "LOCK" position (1), the rear door can
only be opened from outside. When the
lock lever is in the "UNLOCK" position (2),
the rear door can be opened from inside or
outside.
WARNING
Be sure to place the child lock in the
"LOCK" position whenever children
are seated in the rear.
(2)
(1)
80J091
- Quick Links:
- Specified Oil
- Specifications
Hide quick links:
Chapters
Table of Contents
