Page 1
Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference Release 13.0 MK-92HNAS016-10 October 2016...
Page 2
Hitachi, Ltd., or Hitachi (collectively “Hitachi”). Licensee may make copies of the Materials provided that any such copy is: (i) created as an essential step in utilization of the Software as licensed and is used in no other manner; or (ii) used for archival purposes.
Radio Protection for Germany................. 26 Food and Drug Administration (FDA)............... 26 Chinese RoHS Compliance Statement..............26 4 System overview................29 System components....................30 Server specifications....................31 Attaching a rack stabilizer plate................32 Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Page 4
Restarting an unresponsive server................72 Powering down the server for maintenance..............73 Powering down the server for shipment or storage........... 74 Recovering from power standby................75 8 Hard disk replacement..............77 Intended Audience....................79 Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Page 5
Obtaining backups, diagnostics, firmware levels, and license keys...... 127 Shutting down the servers you are replacing.............128 Configuring the replacement servers..............129 Finalizing and verifying the system configuration..........131 B Parts list for 3080/3090 G1 servers..........133 Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Page 6
Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Preface This manual provides an overview of the Hitachi NAS Platform and the Hitachi Unified Storage File Module hardware. The manual explains how to install and configure the hardware and software, and how to replace faulty components. The following server models are covered: 3080 and 3090.
Page 8
• Backup Administration Guide (MK-92HNAS007)—Provides information about configuring the server to work with NDMP, and making and managing NDMP backups. Note: For a complete list of Hitachi NAS open source software copyrights and licenses, see the System Access Guide. Hardware References •...
Page 9
The practices outlined in this document describe how to configure the system to achieve the best results • Hitachi NAS Platform Best Practices Guide for NFS with VMware vSphere (MK-92HNAS028)—This document covers best practices specific to using VMware vSphere with the Hitachi NAS platform.
Getting help Hitachi Support Connect is the destination for technical support of products and solutions sold by Hitachi. To contact technical support, log on to Hitachi Support Connect for contact information: https://support.hds.com/en_us/ contact-us.html.
Page 11
Thank you! Preface Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Page 12
Preface Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
About this manual This manual provides an overview of the NAS Platform and the Hitachi Unified Storage File Module hardware. The manual explains how to install and configure the hardware and software, and how to replace faulty components. The following server models are covered: 3080 and 3090.
A tip contains supplementary information that is useful in completing a task. A note contains information that helps to install or operate the system effectively. About this manual Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Page 15
Se le aconseja leer, y entender en su totalidad, cualquier procedimiento marcado con estos iconos antes de proceder. Sugerencia: Una sugerencia indica información adicional que puede serle de utilidad en la finalización de una tarea. About this manual Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Page 16
We raden u aan alle procedure-informatie die door deze pictogrammen wordt gemarkeerd, aandachtig te lezen en ervoor te zorgen dat u de betreffende procedure goed begrijpt vóór u verder gaat. About this manual Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Page 17
FÖRSIKT: “Försikt” anger vad som kan leda till data eller utrustningsskador. Fortsätt inte till nästa avsnitt innan du förstår det steg som har markerats med detta meddelande. VARNING: “Varning” anger vad som kan leda till personskador. About this manual Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Page 18
About this manual Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
This section lists important safety guidelines to follow when working with the equipment. Electrostatic discharge precautions □ Safety and handling precautions □ Electrical precautions □ Data protection precautions □ Safety information Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Once the bottom half of the storage cabinet has been filled, the top half of the storage cabinet can be filled. Begin by placing a storage component directly above the server and then fill upwards. Safety information Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
• Unplug a system component if it needs to be moved or if it is damaged. Note: For additional data protection, Hitachi recommends that you use an external UPS to power the server. Also, each of the...
Page 22
To ensure proper operation of the server and the storage subsystems, use only the approved replacement parts for each system. Contact the Hitachi Data Systems Support Center for technical details about replacement parts.
□ European Union (EU) Statement □ Canadian Department of Communication Compliance Statement □ Radio Protection for Germany □ Food and Drug Administration (FDA) □ Chinese RoHS Compliance Statement □ Mandatory regulations Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Properly shielded and grounded cables and connectors must be used in order to meet FCC emission limits. Neither the provider nor the manufacturer is Mandatory regulations Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Caution: This is a Class A product and as such, in a domestic environment, might cause radio interference. Canadian Department of Communication Compliance Statement This Class A digital apparatus meets all the requirements of the Canadian Interference - Causing Equipment Regulations. Mandatory regulations Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Dieses Gerät erfüllt die Bedingungen der EN 55022 Klasse A. Food and Drug Administration (FDA) The product complies with FDA 21 CFR 1040.10 and 1040.11 regulations, which govern the safe use of lasers. Chinese RoHS Compliance Statement Mandatory regulations Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Page 27
Mandatory regulations Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Page 28
Mandatory regulations Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
System overview This chapter describes the components in the Hitachi NAS Platform server system for the following models: • Hitachi NAS Platform, Model 3080 • Hitachi NAS Platform, Model 3090 System components □ Server specifications □ Attaching a rack stabilizer plate □...
In some cases, multiple SMUs are advisable. Storage A Hitachi NAS Platform or Hitachi Unified Storage File Module system can subsystems control several storage enclosures. The maximum number of storage enclosures in a rack depends on the model of storage enclosures being installed. Refer to the Storage Subsystem Administration Guide for more information on supported storage subsystems.
Hitachi Data Systems requires dual 10 GbE switches for redundancy. In a dual- switch configuration, if one switch fails, the cluster nodes remain connected through the second switch.
Attaching a rack stabilizer plate A rack stabilizer plate and mounting hardware are supplied with some system configurations. Hitachi Data Systems recommends that you always use the stabilizer plate when provided. Use of a stabilizer plate is required for those installations with dense trays.
This section describes the components included in the server chassis. A Hitachi Unified Storage File Module system can contain single Hitachi NAS Platform server or several servers that operate as a cluster. Clusters of more than two servers include two 10 Gbps Ethernet switches. Hitachi Data Systems only requires two switches for redundancy.
Introducing the Hitachi NAS Platform This section introduces you to the Hitachi NAS Platform or the system and server. A Hitachi NAS Platform chassis is 3U (5.25 inches) high, 480 millimeters (19 inches) wide, rack mountable, and a maximum of 686 millimeters (27 inches) deep, excluding the fascia.
Page 35
The server needs attention, and a non-critical failure has been detected, for (once every .8 example, a fan or power supply has failed. Flashes once every .8 seconds. seconds) Normal operation. Hitachi NAS Platform server components Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
72 hours, or if a server is left unpowered for a long period of time. If the battery pack is fully discharged: Hitachi NAS Platform server components Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
To replace the NVRAM battery backup pack, see Replacing the NVRAM backup battery pack on page Server rear panel The rear panel of the server features numerous ports, connectors, switches, and LEDs. Hitachi NAS Platform server components Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Page 38
PSU 1 to Fault group A • PSU 2 to Fault group B PSU 2 I/O ports Keyboard (purple) and mouse (green) ports. (Reserved for Customer Service Engineer access only.) Hitachi NAS Platform server components Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
NVRAM is currently being protected by battery backup power. The way an LED flashes provides further information about what is currently occurring. Hitachi NAS Platform server components Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Under normal circumstances, the power button is rarely used. However, the power button can be used to restore power to the system when the server is in a standby power state. Hitachi NAS Platform server components Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
If, after 10 seconds, the LEDs on the power supplies are lit, but the Power Status LED is not lit, press the PWR button to restore power to the system. Open a case with the Hitachi Data Systems Support Center to get the problem resolved.
GbE ports use enhanced small form factor pluggable (SFP+) optical connectors. Note: The 10 GbE customer data network ports cannot be used to interconnect cluster nodes. Figure 5 10 GbE customer data network ports label Hitachi NAS Platform server components Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
No network activity 10/100 private Ethernet ports The 10/100 Private Ethernet Network ports function as an unmanaged switch for the private management network (refer to the Network Administration Hitachi NAS Platform server components Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
The part number is located on the side of the port housing and is only visible when the port is removed. Part number prefixes are different as follows: • 10 GbE: FTLX • FC: FTLF Hitachi NAS Platform server components Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
PSU. LED indicators provide PSU status information for the state of the PSU. Figure 9 Power supply unit details Item Description PSU fan exhaust Power cord connector Hitachi NAS Platform server components Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Page 46
Mains power connections are an IEC inlet in each power supply. Each PSU is only powered from its mains inlet. Two power feeds are required for the Hitachi NAS Platform server components Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Valid operations include: • Management • Install • Upgrade • Update • Repair Note: The USB ports should not be used without guidance from customer support. Hitachi NAS Platform server components Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
SMU and use SSH to access the server's CLI. If your system does not include an external SMU, connect to the server’s internal SMU and use SSH to access the server's CLI. Hitachi NAS Platform server components Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Removing and replacing the front bezel □ Bezel removal □ Replacing a fan □ Replacing the NVRAM backup battery pack □ Replacing a hard disk □ Replacing a power supply unit □ Replacing server components Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
The storage system administrator is responsible for ensuring that the ambient temperature within the rack does not exceed the 35°C operating limit. Replacing server components Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Page 51
• Align the fan lead and its protective sleeve in the space allotted for it on the bottom right side of the fan assembly mounting area. • Fit the fan assembly between the left and right mounting guides. Replacing server components Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Prepare the new battery. Separate the battery pack from the caddy (module case). Procedure Loosen thumbscrew on the rear of the caddy (the side with the electrical connector). Replacing server components Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Page 53
Disconnect the battery from the caddy by pressing down on the retention clip that holds the connector together and then separating the connector. The metal portion of the module can be returned to the supplier or be discarded. Replacing server components Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Gently slide the old battery pack out of the server. Disconnect the battery: a. Carefully push in on the retention clip. b. Carefully pull the connector away from the socket. Replacing server components Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Plug the connector in before inserting the new battery pack. The connector plug must be positioned so that the retention clip is on the left side before pushing it in as shown. Replacing server components Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Page 56
Do not force the plug in. When correctly aligned, it will slide in easily. Carefully insert the battery pack. Ensure that the print is facing left and the cable is on the bottom. Replacing server components Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Check the battery connector to make sure the batter is plugged in correctly. Go to Collecting system backups and diagnostics on page Removing the battery pack: type 2 chassis Remove the NVRAM battery backup pack (type 2, bracket). Replacing server components Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Page 58
Prepare the new battery. See Removing the battery pack from the caddy on page Remove the fascia. Disconnect the battery connector, located on the right side of the battery compartment. Replacing server components Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Page 59
Note: Disconnect the battery pack by grasping the battery pack connector; do not pull on the wires. Remove the battery retention bracket. Gently remove the old battery pack from the compartment. Replacing server components Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Insert the battery pack with the connector cable on the bottom and the printing on the left side. Note: Do not connect the battery connector yet. Fit the left-side of the battery retention bracket into the slot. Replacing server components Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Page 61
Before proceeding to the next step, make sure that the clip is on the left. To connect the battery: a. Position the battery connector so that the retention clip is on the left side. Replacing server components Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Back up the Server registry (Internal SMU - this will include the SMU configuration). a. Navigate to Home > Server Settings > Configuration Backup and Restore. b. Click Backup. Replacing server components Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Enter the COM port that your serial dongle is using. c. Enter 115200 in the Speed box. d. Click Serial in the Category Tree on the left. Replacing server components Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
If the battery is not showing fitted or initialization does not start, call the GCC to open a SR for resolution. Collecting a final diagnostic Collect a final diagnostic as the last step in battery replacement. Replacing server components Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Procedure Make sure you have the new hard disk(s) present. Shut down the server (see Rebooting or shutting down a cluster on page 71 for more information). Replacing server components Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Page 66
In either of the cases described above, you must remove and reuse the four (4) TORX10 mounting screws that hold the hard disk in the carrier before mounting/ remounting the hard disk. Replacing server components Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
PSU means that there is no redundancy in that area, increasing the risk of an interruption in service to clients. LED indicators on each PSU indicate the PSU status. Replacing server components Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Page 68
PSU does not start immediately, make sure the mains power circuit is live and that the other end of the power cable is connected to a live outlet. Replacing server components Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Restarting an unresponsive server □ Powering down the server for maintenance □ Powering down the server for shipment or storage □ Recovering from power standby □ Rebooting, shutting down, and powering off Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Note that rebooting may take up to five minutes. • Click Shutdown to stop file serving EVSs on the server, and then shut down and power off the server. Rebooting, shutting down, and powering off Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Clicking Reboot stops all file serving EVSs on the selected node or all cluster nodes, then reboots the node/nodes. Rebooting may take up to five minutes. Rebooting, shutting down, and powering off Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
If you are still unable to get to the server OS, perform the following steps: Check to make sure that the Bali CLI is booting successfully. Log in through the serial cable connection. Rebooting, shutting down, and powering off Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
(an internal SMU is turned off when the server shuts down). Power off the storage subsystems, beginning with the enclosures that house the RAID controllers. Power off the expansion enclosures for the storage subsystems. Rebooting, shutting down, and powering off Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Release the reset button to disable the battery. The NVRAM Status LED goes out. Note: The NVRAM contents are lost. The battery is re-enabled when power is restored to the server. Rebooting, shutting down, and powering off Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
• Pressing the PWR button. • Remove the power cables from both PSUs, wait for 10 seconds, then reconnect the cables to the PSUs. Rebooting, shutting down, and powering off Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Page 76
Rebooting, shutting down, and powering off Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Step 5: Save the preferred mapping and migrate EVSs (cluster node only) □ Step 6: Replacing a Server’s Internal Hard Disk □ Step 7: Synchronizing server’s new disk □ Hard disk replacement Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Page 78
Step 8: Replacing the server’s second disk □ Step 9: Synchronizing the second new disk □ Step 10: Restore EVSs (cluster node only) □ Hard disk replacement Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Intended Audience These instructions are intended for Hitachi field personnel, and appropriately trained authorized third-party service providers. To perform this procedure, you must be able to: • Use a terminal emulator to access the HNAS server CLI and Bali console.
Health Check” on page 55 for more information. The hard disk replacement process is as follows: Procedure Perform a health check: See Step1: Performing an Internal Drive Health Check on page 83 for more information. Hard disk replacement Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Use the terminal emulator and null modem cable to access the NAS server’s Linux operating system. Procedure Configure the terminal emulator as follows: • Speed: 115200 • Data bits: 8 bits • Parity: None • Stop bits: 1 Hard disk replacement Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Using SSH for an Internal SMU on page Procedure SSH into the external SMU as manager. Enter the following command: ssh manager@[IP Address] where [IP Address] is the IP address of the NAS server/node. Hard disk replacement Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
If both disks have errors, contact technical support and escalate the errors based on the health check output. To run the health check: Hard disk replacement Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Page 84
In the sample output from the smartctl command below, the portion of the information that indicates SMART support is underlined: === START OF INFORMATION SECTION === Device Model: ST9250610NS Serial Number: 9XE00JL3 Hard disk replacement Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Page 85
Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: 1) minutes. Extended self-test routine recommended polling time: 49) minutes. Conveyance self-test routine Hard disk replacement Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Record the IP Address of the system you choose. Run the evs list command. • For a single-node cluster or a standalone server, record the administrative services EVS IP address. Hard disk replacement Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Page 89
Step1: Performing an Internal Drive Health Check on page • If the values are not correct, run the trouble chassis-drive command. If the command response displays “No found,” repeat the health check, as faults Hard disk replacement Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
X is the number of cluster node (the pnode-id) to identify. The result of this command is that the server’s fault and power LEDs (located on the left side of the server’s rear panel) flash simultaneously. Hard disk replacement Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Navigate to Home > Server Settings > EVS Migration to display the EVS Migration page. Note: If the SMU is currently managing a cluster and at least one other cluster or standalone server, the following page appears: Hard disk replacement Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Page 92
EVS Mappings section. Migrate EVSs as required: • To migrate all EVSs between cluster nodes: a. Select Migrate all EVS from cluster node ___ to cluster node ___. Hard disk replacement Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
• For a standalone server, navigate to Home > Restart, Reboot or Shutdown Server > Shutdown. • Using the CLI, shut down the server using the following command: shutdown –-powerdown –-ship -f Hard disk replacement Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Page 94
Step 7: Synchronizing server’s new disk on page 100 for more information. Disconnect the fan power connector by pressing down on the connector’s retention latch and gently pulling the connector apart. Hard disk replacement Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Page 95
Remove the fan assembly covering the disk you want to replace. When replacing hard disk B, remove fan assembly 2 (the center fan assembly). Hard disk B should now be visible. Hard disk replacement Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Page 96
Note: The carrier used for replacement hard disks may be different than the carrier holding the old hard disks. The new carriers fit into the same place and in the same way as the older carriers. Hard disk replacement Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Page 97
Disconnect the power and SATA cables from the hard disk. Loosen the thumbscrew on the right side of the hard disk carrier. Note that the thumbscrew cannot be removed from the carrier. Hard disk replacement Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Page 98
To install the replacement hard disk, lift the right side of the carrier until you can insert the tabs on the left side of the disk carrier into the slots on the floor of the server chassis. Hard disk replacement Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Page 99
Connect the power and SATA cables to the replacement hard disk. Reinstall the fan in the mounting slot, with the cable routed through the chassis cut-out. Hard disk replacement Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
The values in the Status column should be: • “Good” for synchronized volumes. • “Rebuilding” for the volume currently being synchronized. • “Degraded” for any volume(s) that have not yet started the synchronization process. Hard disk replacement Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Log into Web Manager as user manager. By default, the password is nasadmin but this password may have been changed. Navigate to Home > Server Settings > EVS Migration to display the EVS Migration page. Hard disk replacement Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Page 102
EVSs (cluster node only) on page 91, click Migrate all to preferred in the EVS Mappings section. • If the preferred mapping was not saved, migrate EVSs as required: Hard disk replacement Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Page 103
From the first drop-down list, select the cluster node to migrate. c. From the second drop-down list, select the cluster node to which the EVS will be migrated. d. Click Migrate. Hard disk replacement Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Page 104
Hard disk replacement Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Replacing a single server with an embedded SMU □ Replacing a single server with an external SMU □ Replacing a node within a cluster □ Replacing all servers within a cluster □ Server replacement procedures Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
There are a minimum of four parts to be reused in the replacement server. The components that can be swapped include: • Battery • Bezel • Rack mounting guides Server replacement procedures Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
As part of a field replacement process, Hitachi Data Systems recommends that temporary keys be obtained to enable quick delivery and implementation. However, any temporary keys used must eventually be replaced with a permanent key.
If this circumstance is encountered, call the support organization for a copy of the system's latest diagnostics files. If available, these files can be used as a guide in reestablishing the system Server replacement procedures Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
SMU and server configuration files in one complete set. Navigate to Home > Status & Monitoring > Diagnostics download to download the diagnostic test results. Server replacement procedures Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Page 110
Both the server and SMU firmware versions must match those on the failed server; otherwise, the server cannot properly restore from the backup file. See the release notes and the Hitachi NAS Platform and Hitachi Unified Storage File Module System Installation Guide for release- specific requirements.
Servers shipped from the factory have not yet had the nas-preconfig script run on them, so a replacement server will not have any IP addresses pre- configured for your use. You need IP addresses for the following: Server replacement procedures Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Page 112
Verify and, if necessary, convert the new server to the model profile required. This step requires a separate process, training, and license keys. Contact Hitachi Data Systems Support Center if the incorrect model arrives for replacement. Navigate to Home > SMU Administration > Upgrade SMU to verify and, if necessary, upgrade the embedded SMU to the latest SMU release.
Navigate to Home > Server Settings > License Keys to load the license keys. Remove the previous license keys in the backup file, and add the new keys. Server replacement procedures Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Page 114
Permanent license keys for the replacement server are normally provided within 7 days. Server replacement procedures Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Ensure you save the backup file to a safe location off platform so that you can access it after the storage system is offline. Server replacement procedures Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
LEDs turn off. The PSU and server fans continue to run until you remove the power cables from the PSU module. See the appropriate system component section for more information. Server replacement procedures Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
This step allows the SMU to recognize the server as the same and allows it to be managed. Reconfigured settings: • IP addresses for Ethernet ports 0 and 1 • Gateway • Domain name • Host name Server replacement procedures Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Page 118
Verify and, if necessary, convert the new server to the model profile required. This step requires a separate process, training, and license keys. Contact Hitachi Data Systems Support Center if the incorrect model arrives for replacement. Navigate to Home > Server Settings > Firmware Package Management to verify and, if necessary, upgrade the new server to the latest SU release.
Note: The following steps show the FC link speed as 8 Gbps as an example. Procedure Navigate to Home > Server Settings > License Keys to load the license keys. Server replacement procedures Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Page 120
Navigate to Home > Status & Monitoring > System Monitor and verify the server status: • If the server is operating normally, and is not displaying any alarm conditions, run a backup to capture the revised configuration, and Server replacement procedures Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
ETH0 Subnet Mask ETH1 IP Address (if applicable) WWN-Port 1 WWN-Port 2 WWN-Port 3 WWN-Port 4 How is the current node connected to the storage? Direct Connected SAN Connected Server replacement procedures Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Shut down the node. Once the node is shut down, go to Home > Server Settings > Cluster Configuration and delete the entry for the node that you are replacing. Server replacement procedures Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Finalizing and verifying the server configuration On the new server: Procedure Navigate to Home > Status & Monitoring > System Monitor to verify the server status: Server replacement procedures Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Page 124
Online and Robust and has the correct number of nodes. Use CLI to verify that the new node has access to the System Drives. Use sd-list from the node that you have just replaced. Server replacement procedures Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Page 125
To set the preferred node for any remaining EVSs, navigate to Home > Server Settings > EVS Management > EVS Details. Server replacement procedures Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Important: Set expectations up front with the customer that this will delay time to recovery, and that some aspects of the systems configuration might never be recovered. Server replacement procedures Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Select the devices for which diagnostics are required by checking the appropriate boxes. Then click download. Navigate to Home > Server Settings > Firmware Package Management to verify the existing server (SU) firmware release level. Server replacement procedures Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
PSU module. See the appropriate system component section for more information. Note: This specific powerdown command prepares the system for both shipping, and potential long-term, post-replacement storage. Server replacement procedures Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
On a replacement server: Procedure Log in to the server. Run the nas-preconfig script. The IP addresses are assigned at this step. Reboot if you are instructed to by the script. Server replacement procedures Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Page 130
Verify and, if necessary, convert the new server to the model profile required. This step requires a separate process, training, and license keys. Contact Hitachi Data Systems Support Center if the incorrect model arrives for replacement. Navigate to Home > Server Settings > Firmware Package Management to verify and, if necessary, upgrade the new server to the latest SU release.
Features such as replication and data migration should all be confirmed as working, and all file systems and storage pools should be online. Server replacement procedures Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Page 132
Server replacement procedures Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
EMEA units start with a S/N starting with M2SEKW13 or higher SX345278 System Management Unit • Required for Cluster (current) • Can use SX325121 300 (SMU300) Parts list for 3080/3090 G1 servers Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Page 134
Brocade VDX 6730 80MM Fan assy, Non Port Side Exhaust SX222096 Copper cable - SFP+ 10GE passive twinax, Cluster & 10GbE, 1 meter, RoHS 6 Parts list for 3080/3090 G1 servers Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Page 135
FTLX8511D3 FTLX1412D3BCL Multi-source XFP 10Gbps; Subsitute part number FTLX1411D3 Single Mode 1310nm; LC 3.3v FTLX1411D3 XFP - 10G LWL 10km Can use FTLX1412D3BCL Finisar 1-Pk Parts list for 3080/3090 G1 servers Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Page 136
Parts list for 3080/3090 G1 servers Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Page 137
Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference...
Page 138
Hitachi Data Systems Corporate Headquarters 2845 Lafayette Street Santa Clara, California 95050-2639 U.S.A. www.hds.com Regional Contact Information Americas +1 408 970 1000 [email protected] Europe, Middle East, and Africa +44 (0) 1753 618000 [email protected] Asia Pacific +852 3189 7900 [email protected] MK-92HNAS016-10...