Table of Contents
Instructions for use and maintenance
2.2.8 Transmission assembly
The Transmission Assembly contains the crankshaft (1), con-rods and crank mechanism and
transforms the rotary motion of the crankshaft into the alternating motion of the pistons.
The figure shows a typical system.
The type of construction, high quality materials employed and assembly by our highly specialised
staff ensure long and reliable service.
Proper lubrication is critical to the long life of the transmission assembly and its components: make
sure you observe the specified change intervals, along with the fluid levels and lubricant types.
In normal conditions, the crank gear system requires no maintenance. If you encounter abnormal
noise or uneven operation of the machine, or the lubrication oil pressure is low and the pressure
switch trips, contact the GEA Niro Soavi service department for technical assistance.
TRANSMISSION ASSEMBLY
FIG. 2.11
This manual is owned by GEA Niro Soavi Any reproduction, even partial, is prohibited.
02C100-7C0
34
GEA Niro Soavi
- Quick Links:
- Operating Principle
Hide quick links:
Chapters
Table of Contents
Troubleshooting
