Table of Contents
Quick Links
Table of Contents
Related Manuals for D-Link DWR-920V
Summary of Contents for D-Link DWR-920V
- Page 1 Version 1.00 | 05/08/2019 User Manual Wireless N300 4G LTE Router DWR-920V...
- Page 2 Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions Revision Date Description May 10, 2019 • Initial release...
-
Page 3: Table Of Contents
Setup Wizard ................15 System ....................53 Connection Settings ............16 System Information ............53 Wi-Fi Status ................17 Admin Settings ..............54 Admin Settings ..............19 Account ................54 Internet Settings ..............21 Language ................55 Apply Settings ..............24 Date & Time ..............56 Internet Settings .................25 D-Link DWR-920V User Manual... - Page 4 Configuring Wireless Encryption ........69 Using Windows Vista™ ..............72 Configuring Wireless Encryption ........73 Using Windows XP ..............75 ® Troubleshooting ..............76 Networking Basics ............78 Check your IP address ...............78 Statically Assign an IP address ..........79 Technical Specifications ..........80 Regulatory Information ..........81 D-Link DWR-920V User Manual...
-
Page 5: Product Overview
Section 1 - Product Overview Product Overview Package Contents D-Link DWR-920V Wireless N300 4G LTE Router Power Adapter 3G/4G Antennas RJ45 Cable RJ11 Cable If any of the above items are missing or damaged, please contact your reseller. ErP Power Usage This device is an Energy Related Product (ErP) with High Network Availability (HiNA), and automatically switches to a power-saving Network Standby mode within 1 minute of no packets being transmitted. -
Page 6: System Requirements
• Safari 4 or higher • Chrome 20 or higher Windows Users: Make sure you have the latest version of Java installed. Visit ® www.java.com to download the latest version. Subject to services and service terms available from your carrier. D-Link DWR-920V User Manual... -
Page 7: Introduction
High-Speed Mobile Internet with LTE Connectivity The DWR-920V Wireless N300 4G LTE Router gives you high-speed Internet wherever you are and lets you share it on the go. Using LTE technology, you can achieve download speeds of up to 150 Mbps and upload speeds of up to 50 Mbps . -
Page 8: Hardware Overview
Press this button to add new wireless devices quickly and easily using Wi-Fi Protected Setup (WPS). Reset Button Using a paper clip, press and hold this recessed button for 3 seconds to reset the device to default. LED Indicators Status display. Please refer to LED Indicators on page 6. D-Link DWR-920V User Manual... - Page 9 Use a RJ-45 Ethernet cable to connect a device to the router to connect it to your network and the LAN1 Internet. W/LAN Use a RJ-45 Ethernet cable to connect your modem to the router to access the Internet. Phone Port Connect a phone here that uses a regular phone line. D-Link DWR-920V User Manual...
-
Page 10: Led Indicators
Traffic is being transmitted over LTE/Ethernet WAN. Internet Solid Green Connected to a 2G/3G network. Blinking Green Traffic is being transmitted over 2G/3G. Solid Red No SIM/UICC card inserted or no network service. Signal Strength Blinking Red Indicates signal strength. D-Link DWR-920V User Manual... -
Page 11: Installation
3. Connect the power adapter to the socket on the back panel of your DWR-920V. Plug the other end of the power adapter into the wall outlet or power strip. Press the power button to turn the device on. -
Page 12: Wireless Installation Considerations
Wireless Installation Considerations The DWR-920V can be accessed using a wireless connection from anywhere within the operating range of its wireless network. Keep in mind that the quantity, thickness, and location of walls, ceilings, or other objects that the wireless signals must pass through may adversely affect wireless signals. -
Page 13: Configuration
Initial Connection to the Router By default, the DWR-920V comes configured to work with most 4G SIM/UICC cards. If you wish to configure the router, you will need to establish a direct connection with the router in order to access the web-based configuration utility. For information please refer to Connect via Wi-Fi on page 10. -
Page 14: Connect Via Wi-Fi
DWR-920V will be in the format dlink_DWR-920V_xxxx, where “xxxx” represents the last four characters of the DWR-920V’s MAC address. The default SSID and password can also be found on the product label attached to the battery cover. For more information on where to find this label refer to Hardware Overview on page 4. - Page 15 You can also set up a connection using the Windows built-in WPS feature. Please see Connecting to a Wireless Network on page 63page 63. D-Link DWR-920V User Manual...
-
Page 16: Web-Based Configuration
Once you have reached the configuration utility through your web browser, you will need to log in. Enter admin as the username, and then enter the password. By default, the password should be left blank. Click Sign in to continue. D-Link DWR-920V User Manual... -
Page 17: Navigation
The System tab allows you to view system information, change your login information, and upgrade the firmware. From the SMS tab, you can sent and receive SMS text messages, as well as USSD (Unstructured Supplementary Service Data) codes, sometimes called “Quick Codes” or “Feature Codes. ” D-Link DWR-920V User Manual... -
Page 18: Quick Access
Section 3 - Configuration Quick Access A quick access page will be displayed on the initial home page for the DWR-920V. The headings below link through to windows where you can alter settings in more detail. Internet This area displays your Internet provider, the type of Internet service you are using, signal strength, and your current data usage. -
Page 19: Network Setup
The Wizard page will guide you through the steps required to configure the basic settings of your router, such as the IP address, network name (SSID), and password. Click on the Setup Wizard button to begin the quick setup wizard. D-Link DWR-920V User Manual... -
Page 20: Connection Settings
Select this if your service provider uses this protocol. Password Authentication Protocol. Select this if your service provider uses this protocol. CHAP Challenge Handshake Authentication Protocol. Select this if your service provider uses this protocol. Click Next to move to the next section. D-Link DWR-920V User Manual... -
Page 21: Wi-Fi Status
Pre -Shared Key The pre-shared key is the password which clients will require in order to connect to your network. Enter a password of between 8 and 63 characters in length. D-Link DWR-920V User Manual... - Page 22 Select whether you wish to use 64 bit or 128 bit characters in your key using the slider menu. Enter the desired key in the field provided. Click Next to move to the next section. D-Link DWR-920V User Manual...
-
Page 23: Admin Settings
Select your current time zone relative to UTC (Coordinated Universal Time). Date & Time Adjust the dials on the screen with your mouse cursor or pointer to set the time and date. Selected Date and Time Displays your new, dial-adjusted time. D-Link DWR-920V User Manual... - Page 24 Select your current time zone relative to UTC (Coordinated Universal Time). Synchronization You can specify in hours how frequently the Cycle DWR-920V will synchronize with the SNTP server. Click Next to move to the next section. D-Link DWR-920V User Manual...
-
Page 25: Internet Settings
If you have chosen Dynamic IP, see WAN Connection Type - DHCP (Auto Config) on page 22. If you have chosen Static IP, see WAN Connection Type - Static IP Address Connection on page 22. If you have chosen PPPoE, see WAN Connection Type - PPPoE (ADSL) on page 23. D-Link DWR-920V User Manual... - Page 26 IP Address Enter the IP Address assigned to your network connection. Subnet Mask Enter the subnet mask. Default Gateway Enter the default gateway. Primary DNS Enter the primary DNS server. Secondary DNS Enter the secondary DNS server. D-Link DWR-920V User Manual...
- Page 27 This establishes the amount of time of On demand Mode: inactivity before disconnecting an established Idle Time PPPoE session. The On Demand idle time must be greater than 0 minutes. Click Next to move to the next section. D-Link DWR-920V User Manual...
-
Page 28: Apply Settings
Section 3 - Configuration Apply Settings Check all settings in the wizard and click Apply. After applying your settings, your router will need to reboot. Click Apply to save changes. D-Link DWR-920V User Manual... -
Page 29: Internet Settings
Displays your current IP address. Total DL Displays the total amount of downloaded data. Total UL Displays the total amount of uploaded data. Note: These counters may be reset when the battery or SIM/UICC card is removed. D-Link DWR-920V User Manual... -
Page 30: Internet Settings
Note that by default, the 4G connection is used as your primary connection. If you are not sure which settings to use, please contact your Internet Service Provider (ISP). For more information, refer to Internet Settings on page 21. D-Link DWR-920V User Manual... -
Page 31: Router Lan Settings
The DWR-920V has a built-in DHCP server which can assign IP addresses to connected clients. This section shows your current settings and allows you to configure the IP address for the DWR-920V as well as configure its DHCP settings. Configure DHCP This button takes you through to DHCP Settings where you can configure your IP address and IP range. -
Page 32: Dhcp Service
Section 3 - Configuration If you selected Configure DHCP: DHCP Service Here you can configure the IP address for the DWR-920V, as well as the range of IP numbers that the DHCP will give out. DHCP Service Enable/disable the DHCP Server. -
Page 33: Apn Settings
If so, you may need to contact your service provider regarding these details. Access Point Name (APN) Settings APN Selection Mode Auto - Select this option if you want the DWR-920V to automatically connect to a mobile network after it has been powered on, or has been disconnected from its current mobile network. - Page 34 Choose the authentication method that your ISP uses to connect to its mobile network. If you do not know this information, please contact your service provider. For more information refer to Connection Settings on page 16. Click Apply to save changes. D-Link DWR-920V User Manual...
-
Page 35: Connection Mode Settings
Check with your provider for details. Choose between Always or Manual for connecting Network Status to the Internet. If you selected Manual Connection Mode: Connect/disconnect Toggle the switch to enable/disable your Internet manually connection. Click Apply to save changes. D-Link DWR-920V User Manual... -
Page 36: Sim/Uicc Card Pin Lock Settings
Section 3 - Configuration SIM/UICC Card PIN Lock Settings This section allows you to lock the SIM/UICC card currently inserted into the DWR-920V. SIM/UICC No. of Retry The number of retries left to access your SIM/UICC. Note: If you exceed the number of retries, your SIM/ UICC card will be locked and can only be unlocked by your operator. -
Page 37: My Operator (Plmn)
This page allows you to view available Public Land Mobile Networks (PLMN). This page can also be used to select a preferred network when you are roaming outside of your home network. Operator Mode (PLMN) PLMN Mode Displays the current mode the DWR-920V is operating in. Select Automatic to allow the DWR-920V to automatically connect to the first available network when roaming. - Page 38 ID number assigned to each available PLMN. Use it Check the box to select your desired network. Status The network’s current status. Operator Name The name of the cellular network. Access Technology The cellular network’s access technology. Click Apply to save changes. D-Link DWR-920V User Manual...