GE Café Series Dimensions And Installation Information
36" all gas professional range with 6 burners (natural gas)
Hide thumbs
Also See for Café Series:
- Installation instructions manual (27 pages) ,
- Owner's manual (78 pages) ,
- Owner's manual (72 pages)
Quick Links
CGY366SELSS
GE Café
Series 36" All Gas Professional Range with 6 Burners (Natural Gas)
™
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
NOTE: Professional ranges offer a number of choices
in size and cooktop configurations. All Professional
Ranges are factory set for natural gas.
NOTE: Conversion kits are included with the range.
High Altitude kit, WB28K10553 for operation above
6,000 feet (for Natural and LP gas models), is also
available. The kits must be installed by a qualified
service technician at additional cost.
INSTALLATION INFORMATION: Before
installing, consult installation instructions packed
with product or online at geappliances.com for
current dimensional data.
A suitable 36" or wider vent hood is required
for installation over ranges with a grill and
recommended for all other ranges.
ADVANCE PLANNING: Refer to dimensional
drawings for appropriate placement and necessary
clearances when planning the installation.
- Working areas adjacent to the range should have
18" minimum clearance between countertop and
cabinet bottom.
- Clearance between range and side wall or
combustible material must be at least 12" on
each side.
- Installation must conform with local codes.
In the absence of local codes, the range must
comply with the National Fuel Gas Code,
ANSI Z223.1-1990.
For answers to your GE Appliances product questions, visit our website
at geappliances.com or call GE Answer Center
35 7/8" width
35 1/4"
to
36 3/4"
height
28 1/4"
Depth
to front
of door
WARNING: Installations without a hood require
CGY366SELSS
48" minimum to combustibles. A custom hood
C2Y366SELSS
installation with exposed horizontal combustible
surfaces must have an Auto-On feature. Refer to
hood installation instructions for specific hood
clearances.
The surface of the entire back wall above the range
and below the hood must be covered with a non-
combustible material such as metal, ceramic tile,
brick, marble or other stone.
Service, 800.626.2000.
®
1 1/2"
Countertop
to Cooking
Surface
3 1/4"
to 4 3/4"
Toekick/leg
height
13"
max.
All GE Appliances ranges are equipped
with an Anti-Tip device. The installation
of this device is an important, required
step in the installation of the range.
12" minimum
48" minimum
to adjacent wall
to combustibles
18"
Non-Combustible
min.
Material
12" minimum
each side
36" min.
ADDITIONAL CLEARANCES:
Allow 12" minimum clearance to an adjacent wall
on each side.
Working areas adjacent to the rangetop should have
18" minimum clearance between countertop and
the bottom of the wall cabinet.
Listed by
Underwriters
Laboratories
Specification Revised 10/17
Related Manuals for GE Café Series
Summary of Contents for GE Café Series
- Page 1 Anti-Tip device. The installation Laboratories of this device is an important, required step in the installation of the range. For answers to your GE Appliances product questions, visit our website at geappliances.com or call GE Answer Center Service, 800.626.2000. ®...
- Page 2 Anti-Tip device. The installation Laboratories of this device is an important, required step in the installation of the range. For answers to your GE Appliances product questions, visit our website at geappliances.com or call GE Answer Center Service, 800.626.2000. ®...
- Page 3 CGY366SELSS GE Café Series 36" All Gas Professional Range with 6 Burners (Natural Gas) ™ FEATURES AND BENEFITS Six sealed 18,000 BTU dual stack burners - Delivers a full spectrum of heating settings, from an ultra-low 140 F simmer to an intense...