Panasonic KX-TDE200 Getting Started
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. PBX
  5. KX-TDE200
  6. Getting started

Panasonic KX-TDE200 Getting Started

For physical cards
Hide thumbs Also See for KX-TDE200:
Table of Contents

Quick Links

See also: Pc Programming Manual , Feature Manual
Thank you for purchasing a Panasonic Pure IP-PBX.
Please read this manual carefully before using this product and save this manual for future use.
KX-TDE100/KX-TDE200: PMMPR Software File Version 2.0000 or later
Pure IP-PBX
Getting Started
for Physical Cards
KX-TDE100
Model No.
KX-TDE200
Table of Contents
loading

Related Manuals for Panasonic KX-TDE200

Summary of Contents for Panasonic KX-TDE200

  • Page 1 Getting Started for Physical Cards KX-TDE100 Model No. KX-TDE200 Thank you for purchasing a Panasonic Pure IP-PBX. Please read this manual carefully before using this product and save this manual for future use. KX-TDE100/KX-TDE200: PMMPR Software File Version 2.0000 or later...

  • Page 2: Table Of Contents

    Table of Contents Before Installation .................. 3 System Connection Diagram ...................4 Unpacking..........................5 Installation....................7 Opening/Closing the Front Cover..................8 Inserting the SD Memory Card to the IPCMPR Card............9 Installing the Option Units ....................9 Installing the Trunk Cards ....................11 Installing the Extension Cards (DLC8/DLC16/DHLC8/MSLC16/SLC8/SLC16/CSLC16) ...14 Connecting Extensions ....................14 Frame Earth Connection ....................15 Before Programming ................

  • Page 3: Before Installation

    Section 1 Before Installation Getting Started for Physical Cards...

  • Page 4: System Connection Diagram

    1.1 System Connection Diagram System Connection Diagram DLC16 LCOT4 (KX-TDA0172) (KX-TDA0183) DLC8 KX-T7600 KX-T7600 KX-T7636/ (KX-TDA0171) Console LCOT16 KX-T7633 (KX-TDA0181) DHLC8 (KX-TDA0170) LCOT8 (KX-TDA0180) CSLC16 CID/PAY8 (KX-TDA0177) (KX-TDA0189) PT-interface CS (Basic/High-density) Voice Wireless Phone CID8 MSLC16 (DHLC only) (DHLC only) Processing (DHLC only) (KX-TDA0193)

  • Page 5: Unpacking

    CD-ROM (including manuals, etc.) × 1 AC Cord* × 1 Screw A Screw B (Black) × 3 (KX-TDE100) × 2 (KX-TDE100) × 4 (KX-TDE200) × 6 (KX-TDE200) Anchor Plug Mini Plug (for pager and Ferrite Core (for the IPCMPR × 3 (KX-TDE100) music source) ×...
  • Page 6 1.2 Unpacking Necessary items (not supplied): Telephone cable for extension connection: Diameter of cable Maximum length of cable (ø 0.4 mm to ø 0.6 mm) ø 0.5 mm 1128 m for SLT ø 0.5 mm 720 m for KX-T7600 series ø...

  • Page 7: Installation

    Section 2 Installation Getting Started for Physical Cards...

  • Page 8: Opening/Closing The

    2.1 Opening/Closing the Front Cover Opening/Closing the Front Cover Opening the Front Cover Insert a flathead screwdriver into the opening (on the left of the screw cover) and unlatch the screw cover. Turn the screw anticlockwise to loosen. Slide the front cover to the right until it stops, then lift the front cover. Closing the Front Cover Hook the front cover onto the shelf (line up the protrusions on the cover with the receptacles on the shelf), then slide the front cover to the left until it locks.

  • Page 9: Inserting The Sd Memory Card To The Ipcmpr Card

    Inserting the SD Memory Card to the IPCMPR Card The SD Memory Card contains software for all the processes of the PBX and all the customer data. The SD Memory Card must be inserted before startup. Example: KX-TDE200 IPCMPR Card Memory Card...
  • Page 10 2.3 Installing the Option Units CAUTION To protect the back board from static electricity, do not touch parts on the back board in the main unit, PSU, and on the optional service cards. To discharge static electricity, touch ground or wear an earthing strap.

  • Page 11: Installing The Trunk Cards

    2.4 Installing the Trunk Cards Be sure to cover each slot in which no optional service card is installed by using a Blank Slot Cover. For details, refer to "Covering the Blank Slots" in "3.2.7 Installing/Removing the Optional Service Cards" of the Installation Manual.
  • Page 12 2.4 Installing the Trunk Cards BRI4/BRI8 Card To attach the ferrite core Example: BRI8 Card When using 1 or 2 cables: RJ45 TX2(-) RX1(-) RX2(+) TX1(+) LINE 1 to LINE 8 When using 3 or 4 cables: To NT1 • For every 4 cables, use 1 ferrite core;...
  • Page 13 2.4 Installing the Trunk Cards PRI30/PRI23 Card Example: PRI30 Card To attach the ferrite core RJ45 5 cm BNC (TX) To NT1 BNC (RX) To NT1 For RJ45 120Ω 120Ω 75Ω 75Ω For BNC Accessories (included): Ferrite core × 1 User-supplied (not included): RJ45 or BNC connectors Notes •...

  • Page 14: Installing The Extension Cards (Dlc8/Dlc16/Dhlc8/Mslc16/Slc8/Slc16/Cslc16)

    2.5 Installing the Extension Cards (DLC8/DLC16/DHLC8/MSLC16/SLC8/SLC16/CSLC16) Installing the Extension Cards (DLC8/DLC16/ DHLC8/MSLC16/SLC8/SLC16/CSLC16) Example: DHLC8 Card To attach the ferrite core 3 cm Amphenol To extensions Accessories (included): Screws × 2, Ferrite core × 1 User-supplied (not included): Amphenol connector Note Attach the included ferrite core to the cable.

  • Page 15: Frame Earth Connection

    2.7 Frame Earth Connection Frame Earth Connection IMPORTANT Connect the frame of the PBX to earth. Loosen the screw. Screw Insert an earthing wire (user-supplied)*. Tighten the screw. Connect the earthing wire to earth. Earthing wire To earth * For earthing wire, green-and-yellow insulation is required, and the cross-sectional area of the conductor must be more than 0.75 mm or 18 AWG.
  • Page 16 2.7 Frame Earth Connection Getting Started for Physical Cards...

  • Page 17: Before Programming

    Section 3 Before Programming Getting Started for Physical Cards...

  • Page 18: Starting The Pbx

    3.1 Starting the PBX Starting the PBX CAUTION • The SD Memory Card must be inserted in the SD Memory Card slot of the IPCMPR card before startup. • Before touching the System Initialise Switch, discharge static electricity by touching ground or wearing an earthing strap.

  • Page 19: Connecting The Pc

    3.2 Connecting the PC Connecting the PC The Maintenance Console serves as an overall system programming tool for the PBX. The Maintenance Console's Quick Setup lets you easily configure the PBX to receive intercom and trunk calls, as well as apply basic settings such as time and date.

  • Page 20: Installing The Maintenance Console

    3.3 Installing the Maintenance Console Installing the Maintenance Console For the system requirements of the PC (e.g., operating system, hardware specifications), refer to "4.3.1 Installing and Starting the Maintenance Console" in the Installation Manual. Notes • Make sure to install and use the latest version of the Maintenance Console. •...

  • Page 21: Programming

    Section 4 Programming Getting Started for Physical Cards...

  • Page 22: Programming The Pbx

    4.1 Programming the PBX Programming the PBX Starting the Maintenance Console and Assigning the Basic Items (Quick Setup) When you start the Maintenance Console with the Installer Level Programmer Code and connect to the PBX for the first time after initialisation (with the factory default setting), Quick Setup will launch automatically. During Quick Setup, you will set up the basic items.
  • Page 23 4.1 Programming the PBX Assigning the BRI Setting (Automatic Configuration) Under Configuration, click Slot. Move the mouse pointer over the BRI card. A menu will be shown under the mouse pointer. Click Ous to set the card to out-of-service status. Click Tool →...
  • Page 24 4.1 Programming the PBX Assigning the Incoming Trunk Call Destination For analogue trunk users (DIL Setting): Under CO & Incoming Call, click DIL Table & Port Settings. Confirm that the DIL tab is selected. Configure the settings as required. Click OK. For ISDN trunk users (DDI Setting): Under CO &...
  • Page 25 4.1 Programming the PBX Setting an Extension Port to Use a DSS Console Under Configuration, click Slot. Move the mouse pointer over the desired extension card to display the menu of options. Click Ous to set the card to out-of-service status.
  • Page 26 4.1 Programming the PBX Getting Started for Physical Cards...

  • Page 27: Confirming The Connection

    Section 5 Confirming the Connection Getting Started for Physical Cards...

  • Page 28: Making And Receiving Calls

    5.1 Making and Receiving Calls Making and Receiving Calls Making Calls To call another extension extension no. Dial extension number. Talk. Off-hook. To call an outside party outside phone no. Off-hook. Talk. Enter automatic Dial outside phone line access number. number.
  • Page 29 Panasonic Communications Co., Ltd./Panasonic Communications Company (U.K.) Ltd. declares that this equipment is in compliance with the essential requirements and other relevant provisions of Radio & Telecommunications Terminal Equipment (R&TTE) Directive 1999/5/EC. Declarations of Conformity for the relevant Panasonic products described in this manual are available for download by visiting: http://www.doc.panasonic.de...
  • Page 30 This material is copyrighted by Panasonic Communications Co., Ltd., and may be reproduced for internal use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic Communications Co., Ltd.

This manual is also suitable for:

Kx-tde100

Table of Contents