Panasonic KX-TDE100 Configuration Manual

Panasonic KX-TDE100 Configuration Manual

Cbeyond sip trunks configuration
Hide thumbs Also See for KX-TDE100:

Quick Links

Cbeyond SIP Trunks Configuration Guide
PBX Platform: KX-TDE/NCP
2/4/2010
1
Rev2
loading

Summary of Contents for Panasonic KX-TDE100

  • Page 1 Cbeyond SIP Trunks Configuration Guide PBX Platform: KX-TDE/NCP 2/4/2010 Rev2...
  • Page 2 It does not describe the purpose and use of all configuration options on the virtual SIP Gateway card. For those details, see the KX- NCP500/1000 and KX-TDE100/200/600 Programming Manual for Virtual SIP CO Line Card and the KX-TDE100/200/600 and KX-NCP500/1000 Manuals available from Panasonic...
  • Page 3: Architecture Overview

    Architecture Overview The following diagram illustrates simple VOIP networks connecting the TDE/NCP PBX: The Case of Cbeyond Setup: Cbeyond will provide its services over a dedicated Circuit terminated at the CPE device sipconnect.mia0.cbeyond.net Default GW 192.168.0.1 MPR IP Address 192.168.0.101 VOIP IP Address 192.168.0.102 2/4/2010 Rev2...
  • Page 4 Basic V-SIPGW16 Settings for Cbeyond 1-Install the PBX Maintenance console into your PC The maintenance console should be available to certified dealers; Dealers can get the latest version of the UPCMC from www.btsdealer.com 2- Connect to the PBX o Start the UPCMC o Click Connect and choose the method of connection using either LAN , RS- 232, Modem, or USB to Connect to your PBX for interactive configuration ** We will be using the LAN method throughout this guide**...
  • Page 5 o Go to 1-Configuration, 1-Slot, move your mouse over the MPR card and select the card property Make sure that the default gateway should be the end router LAN IP address Make sure that you have a valid DSP-VOIP LAN address 2/4/2010 Rev2...
  • Page 6 3- Installing V-SIP W16 card o Go to 1-Configuration, 1-Slot, move your mouse towards the IPCMPR virtual shelf and click on select shelf Highlight the V-SIPGW16 card from the cards list in the left side o Drag the VSIPGW16 card into the trunk portion of the virtual shelf by using the PC mouse lift button 2/4/2010 Rev2...
  • Page 7 o Release the Mouse lift button and click Yes on the dialogue box o Take the V-SIPGW16 card OUS in order to be able to enter the following settings 4-Configuring the VSIP-GW16 card shelf property Move the mouse over the VSIPGW16 card and choose The following settings are required for Cbeyond SIP trunk services on the shelf property: 2/4/2010...
  • Page 8 (SIP Client Port Number = 5060 and NAT-Keep Alive Packet sending ability=Enable) o Click Apply and then OK Card property Move you mouse over the VSIPGW16 card and choose o Click on Common settings o DNS Server IP address method is Manaul o Provide your Cbeyond DNS serevers IP addresses.
  • Page 9 o Click Apply and then OK o Click Cancel on the card property- Virtual SIP gateway screen to exit this screen o Move you mouse over the VSIPGW16 card and choose port property 2/4/2010 Rev2...
  • Page 10 Basic Channel setup: Please locate the SIP Connect Settings details in your Install Profile from Cbeyond Outbound Proxy sip-proxy.mia0.cbeyond.net 1234567890 Main tab According to the account info above, we need to configure the Basic Channel Port as follows: 1- Port 1 channel attribute = Basic channel 2- Provider name= Cbeyond 3- SIP Server Name= SIPConnect Domain= “sip-proxy.mia0.cbeyond.net”...
  • Page 11 o RTP/RTCP Tab: Same as default o T.38, T.38 Option Same as default o DSP, Supplementry services: 1- CLIR = Yes 2- CNIP (Send) = Yes CNIP (Receive) = Additional DID’s Please set the channel attribute for number of ports depending on the number of active SIP lines as”additonal channel for channel 1”...
  • Page 12 Essential PBX Configuration: To Assign the DID numbers destinations, Go to 10-3.CO & Incoming Call DID table Please locate your DID information in the Cbeyond Install Profile under the Trunk Group Information section Important note: Make sure that you provide the 10 digits DID number in the DID number field to be able to make use of the additional DID’s assigned by the Provider.
  • Page 13: Useful Hints

    2- Update your PCMC (Maintenance Tool) with the latest version available on the BTS website and through Panasonic Tech support department 3- Back up your configuration file with the Good known settings...

This manual is also suitable for:

Kx-tde200Kx-tde600Ncp500Ncp1000