Emerson 87340 User Manual

Bettis tec2 display module

Quick Links

User Manual
Part Number: 87340-1001, Rev. 0
Release: April 2015
User Manual for TEC2 Display Module
(Model 87340)
loading

Summary of Contents for Emerson 87340

  • Page 1 User Manual Part Number: 87340-1001, Rev. 0 Release: April 2015 User Manual for TEC2 Display Module (Model 87340)
  • Page 2: Section 1: Display Module

    User Manual Display Module Part Number: 87340-1001, Rev. 0 April 2015 Section 1: Display Module Local Display Module Display Module with Bluetooth - Model 87340. ® The Local Display module consists of the following as shown in Figure 1: •...
  • Page 3 Display Module User Manual April 2015 Part Number: 87340-1001, Rev. 0 The selector knob performs normal selector switch Local/Stop/Remote function and alternate Next/Back display function in the “MONITOR/SETUP” mode as detailed in Table 1. The NEXT and BACK selections are used strictly for cycling through the SETUP displays to locate the desired display or to exit the “SETUP”...
  • Page 4 User Manual Display Module Part Number: 87340-1001, Rev. 0 April 2015 Figure 2 Normal Display The valve has stopped and is 75% opened. The yellow LED is ON and the message center is clear. Table 2. Normal Display Functions Message...
  • Page 5 Display Module User Manual April 2015 Part Number: 87340-1001, Rev. 0 Remote Display Module (RDM) Display Module with Bluetooth - Model 87340 ® The RDM performs the same functions as the LDM. NOTE: If the RDM does not receive communication messages from the Central Control Module (CCM) within 5 seconds after power is applied, the RDM will display the flashing message “CCM LINK...
  • Page 6 Tianjin 301700 Holland Fasor 6 P. R. China Székesfehérvár 8000 The Emerson logo is a trademark and service mark of Emerson Electric Co. T +86 22 8212 3300 Hungary Bettis is a mark of one of the Emerson family of companies.

This manual is also suitable for:

Bettis tec2