Connect To The Console Port; Connect To The Console Port With Microsoft Windows - Cisco Firepower 1100 Series Hardware Installation Manual

Hide thumbs Also See for Firepower 1100 Series:

Table of Contents

Connect to the Console Port

•

You must install a USB device driver the first time a Microsoft Windows-based PC is connected to the USB

console port on the chassis, otherwise the connection fails.

To uninstall the driver, use the Add Remove Programs utility or the Setup-exe program.

Note

Disconnect the console terminal before uninstalling the driver.

Step 1

Obtain the appropriate driver (Cisco_usbconsole_driver_X_X_zip, where X is a revision number) for your model from

the Cisco

Download Software

Step 2

Install the driver.

Step 3

Connect a 5-pin USB Mini B to the console port as shown in the following figure.

Connect to the Console Port with Microsoft Windows, on page 21

Connect to the Console Port with Mac OS X, on page 22

Connect to the Console Port with Linux, on page 23

site, USB Console Software category.

C H A P T E R

Cisco Firepower 1100 Series Hardware Installation Guide

Table of Contents