Installing The Printer Driver In Windows - Epson TM-U200 Series Manual

How to connect an Epson POS printer with Ethernet Interface

Configuration Utilities to Run on the Computer

Epson Flash Utility

The Epson Flash Utility is normally installed with the Epson printer drives. It is used to upload bitmaps to Epson printers,

but has a simple communication test which will check for basic connectivity between the computer and the printer.

Pressing the "Comm. Test" button on the Setup tab of the utility will give a go/no-go indication of basic connectivity.

Installing the TMNet utility also installs the printer driver in Windows. The printer should be visible in the printers folder of

the Windows Control Panel.

Configuring the Printer in Windows

You need to make a few changes in the printer settings to get it to work with the Ethernet adapter. Specifically you need

to configure the port you are using. Open the printer in the Windows Printer Folder. Select the Ports Tab. Turn off

bidirectional support, if enabled.

You must now add the port as s TCP/IP port. Press "Add Port" and select "Standard TCP/IP Port" , then select "New

Port".

http://www.beaglehardware.com/howtoethernet.html[3/4/2011 12:27:20 PM]

download drivers on the printer page

6. Click the