1. Manuals
  2. Brands
  3. Honeywell Manuals
  4. Controller
  5. Product data

Honeywell N05010 Product Data

Non-spring return direct-coupled damper actuators for modulating and floating / 2-position control
Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Quick Links

NON-SPRING RETURN DIRECT-COUPLED DAMPER ACTUATORS FOR
GENERAL
This non-spring return direct-coupled damper actuator
provides modulating and floating/2-position control for:
•
air dampers,
•
VAV units,
•
air handlers,
•
ventilation flaps,
•
louvers, and
•
reliable control for air damper applications with up to 1 m
2
/ (5 Nm) and 2 m
(10 Nm) (seal-less damper blades; air
friction-dependent).
FEATURES
•
Declutch for manual adjustment
•
Adjustable mechanical end limits
•
Removable access cover for direct wiring
•
Mountable in any orientation
•
Function selection switch for selecting modulating or
floating/2-position control
® U.S. Registered Trademark
Copyright © 2005 Honeywell Inc. • All rights reserved
MODULATING AND FLOATING / 2-POSITION CONTROL
N05010/N10010
SPECIFICATIONS
Supply voltage
Nominal voltage
All values stated hereinafter apply to operation under
nominal voltage conditions.
Power consumption
N05010
N10010
Control signal
Modulating
Floating/2-Position
Ambient limits
Ambient operating limits
Ambient storage limits
Relative humidity
Safety
Protection standard
Protection class
Overvoltage category
Lifetime
Full strokes
Repositions
Mounting
Round damper shaft
Square damper shaft
Shaft length
2
End switches (when included)
Rating
Triggering points
Torque rating
Runtime for 90°
mod. (dc / 50/60 Hz ac)
floating (dc / 60 Hz ac)
floating (50 Hz ac)
Rotation stroke
Dimensions
Weight (without cables)
Noise rating
PRODUCT DATA
24 Vac/dc -15%/+20%, 50/60 Hz
24 Vac/dc, 50/60 Hz
5 VA / 2 W
5 VA / 2 W
0...10 V
24 Vac/dc
-20...+60 °C (-5...+140 °F)
-30...+80 °C (-22...+176 °F)
5...95%, non-condensing
IP54
II as per EN 60730-1
II
60000
1.5 million
8...16 mm
6...13 mm; 45° steps
min. 41 mm
5 A (resistive), 3 A (inductive)
5° / 85°
5 Nm / 10 Nm
90 sec
90 sec
110 sec
95° ± 3°
see "Dimensions" on page 8
450 g
35 dB(A) max. at 1 m
EN0B-0478GE51 R0105
Table of Contents
loading

Related Manuals for Honeywell N05010

Summary of Contents for Honeywell N05010

  • Page 1 "Dimensions" on page 8 Function selection switch for selecting modulating or floating/2-position control Weight (without cables) 450 g Noise rating 35 dB(A) max. at 1 m ® U.S. Registered Trademark EN0B-0478GE51 R0105 Copyright © 2005 Honeywell Inc. • All rights reserved...

  • Page 2: Product Identification System

    N05010/N10010 DAMPER ACTUATORS FOR MODULATING AND FLOATING/2-POSITION CONTROL Contents of Package PRODUCT IDENTIFICATION SYSTEM The delivery package includes the actuator, parts 1 through 6 (see Fig. 2), plus two cable grommets and a spare cable N = non-spring return S = spring return grommet.
  • Page 3 N05010/N10010 DAMPER ACTUATORS FOR MODULATING AND FLOATING/2-POSITION CONTROL Table 1 describes, for the floating mode, the shaft adapter Table 3 describes, for the modulating mode, the shaft adapter behavior ("stops," rotates "CCW," or rotates "CW") in behavior ("stops," rotates "totally CCW," rotates "totally CW,"...

  • Page 4: Manual Adjustment

    N05010/N10010 DAMPER ACTUATORS FOR MODULATING AND FLOATING/2-POSITION CONTROL Adaption MANUAL ADJUSTMENT Adaption is a function in which the actuator re-maps its feed- IMPORTANT back signal and control signal in accordance with repositioned mechanical end limits (see also Fig. 6) and thus recognizes To prevent equipment damage, you must remove their new positions.

  • Page 5: Installation

    N05010/N10010 DAMPER ACTUATORS FOR MODULATING AND FLOATING/2-POSITION CONTROL INSTALLATION WIRING CAUTION CAUTION To avoid personal injury (electrical shock) and to To avoid personal injury (electrical shock) and to prevent equipment damage, before installation, prevent equipment damage, before wiring, you you must remove power.

  • Page 6: Wiring Diagrams

    N05010/N10010 DAMPER ACTUATORS FOR MODULATING AND FLOATING/2-POSITION CONTROL Wiring Diagrams Modulating: 0[2]...10V, 10...0[2]V END SWITCHES (max. 230 V, 5 A) 24V~/= A,B: C 24V~/+ A: NC GND/- A: NO 0[2]...10V Y in B: NC POS 50% B: NO 0[2]...10V POS out = override option Fig.

  • Page 7: Spare Parts

    N05010/N10010 DAMPER ACTUATORS FOR MODULATING AND FLOATING/2-POSITION CONTROL SPARE PARTS • 1 anti-rotation bracket + screws • 2 universal terminal blocks Anti-Rotation Bracket Kit • 2 strain-relief clamps • Order no.: A7211.2073 2 grommets* • 2 adjustable end stops *In order to guarantee IP54, only original Honeywell Contains: grommets may be used.
  • Page 8 N05010/N10010 DAMPER ACTUATORS FOR MODULATING AND FLOATING/2-POSITION CONTROL DIMENSIONS N05010 2...10 V 0...10 V Service/Off 10...0 V 10...2 V Fig. 15. Dimensions (in mm) Automation and Control Solutions Honeywell GmbH Böblinger Straße 17 D-71101 Schönaich Phone: (49) 7031 63701 Fax: (49) 7031 637493 http://europe.hbc.honeywell.com...

This manual is also suitable for:

N05010-sw2N10010N10010-sw2

Table of Contents