Table of Contents
Characteristic
Mating connector type
(PC to printer)
Power requirement
Battery life (typical)
Case material
Environmental Conditions
Temperature
Electromagnetic
interference (EMI)
susceptibility and
radiated emissions
standards
2.3.2
The table, starting below, lists complete technical specifications
for the Vibrex 2000 Plus system.
Characteristic
Basic Specifications
Data storage capacity
Built-in test (BIT)
coverage
Honeywell Confidential: Use or disclosure of information on this page is subject to the restrictions on the title page.
Specifications (Continued)
D-sub, 9-pin
3 to 6.4 Vdc, 250 mA
40 hr
Aluminum alloy
0°C to 50°C
Industrial Electronic Control Equipment
Class certified to
• Class Standard EN50081-2
• Standard EN50082-2
Vibrex 2000 Plus
Specifications
Specifications
1 Mb
Memory check and calibration on power
up; user-initiated tests (with
check battery and sensor power
13841 Rev A
17
Chapter 2 – System Overview
NOTE: Errors are logged to a
printable fault log.
key)
STATUS
Chapters
Table of Contents
