Table of Contents
8. Utility Software
This chapter describes the software used to operate the DrvGIII series (hereafter called the
utility software) on a PC.
8.1 Introduction
8.1.1 Operating Conditions
• Hardware
Processor:
Memory:
Hard disk capacity:
Serial port:
• Operating systems
Windows 98 Second Edition, Windows Me, Windows 2000 Professional and Windows XP
have been verified as to their compatibility.
Windows 2000 Professional or higher is recommended.
• Display
Resolution 800 x 600 or higher, 256 color display minimum
• Communication cable
A dedicated cable is required for connection. Either prepare a cable according to the
connection diagram shown in the next section, or purchase a manufactured cable.
• Serial port setting
Normally no setting is required as the serial port is controlled on the application side.
However, if a special converter or other device is used, set the serial port as follows if
necessary.
• Operation verified RS485 card
Manufactured by Interface Co., Ltd.
Celeron 300MHz (equivalent) or higher, or Pentium III 500MHz or
higher is recommended.
64MB minimum
10MB minimum
1 port exclusive
Communication speed:
Data bits:
Parity:
Stop bit:
Flow control:
PCI card: PCI-4142PE
38,400 bits/sec
8
None
1
None
TI71M01D06-01EN 3rd Edition: 2012.12.01
8-1
Table of Contents
