12 | Installation
3.6
Installation in the heat source
The installation of the user interface directly in the heat source
is for example appropriate with weather-compensated control.
When installing the user interface:
▶ Prepare user interface for installation in the heat source:
1.
Fig. 9
Loosen the cover at the back of the user interface
6 720 820 872 (2016/12)
Fig. 10
2.
6 720 812 361-14.2O
Fig. 11
▶ Observe the installation instructions of the heat source.
Remove the cover at the back of the user interface
Mount installation frame at the back of the user
interface
CR 400 | CW 400 | CW 800
6 720 812 361-15.2O
6 720 812 361-12.2O